Renovation of a municipal facility in Belleville, Ontario. Completed plans call for the renovation of a municipal facility.

1. Include Card/fob Reader, Control, Door Opening and Closing System Integrations for All New Doors System 2. Contractor is to Verify Quantities and Dimensions on the Site, Scope and Report Any Discrepancies to the Consultant Before Proceeding 3. These Drawings Are Not to Be Used for Construction Until Authorized in Writing by the Consultant 4. The Contractor is to Provide Detailed Shop Drawings of Doors and Frame for Approval That Indicate: Connection of Door and Frame Components to the Existing Building System With Fasteners, Aluminium Extrusions, Stops, Glazing, Seals, Gaskets, Thermal Breaks, Shims and Sealants. 5. Contractor to Provide Detailed Hardware Schedule as Per Site Conditions and Owner Request 6. Contractor to Integrate Security Film as Per Project Specifications and Designs 7. Contractor to Follow and Comply With the Aoda, Csa-nsc, Obc and Bgis Requirements for the Accessible Door Operators. Contractor to Provide Secuirty and Door Operator Installation Procedures Layout and Details for Approval 8. Include Visually Contrasting Markings on All Glazed Doors to Comply With Csa B651:23, Section 5.2 9. Clear Openings Through Doors to Comply With Csa B651:23, Section 5.2 10. Repair, Patch and Make Good Any Existing Building and Site Elements Which Are Disturbed During the Construction Process. Repairs Are to Match Existing Adjacent Building Elements and Are to Conform to the Heritage Character of the Existing Building. 11. All Door Thresholds to Conform to the Requirements of Csa B651:23, Section 5.2.6 12. Contractor to Engage Hardware Supplier to Identify the Hardware Requirements of Each New Door System, as Per the Latest Building Code, Accessibility Code and Bgis Standards. 13. Apply the Security Film on All Exterior Glazings, Including Transoms and Sidelites, From the Glazing Base to 1321mm (Women's Shoulder Height, 50th/ Percentile). Official bid documents must be obtained from www.bgis.merx.com and bid submissions must be done through the Merx platform. Question Deadline 01/26/2024 at 2:00 PM ET Award subject to final approval.