All questions regarding the various aspects of this bid must be made in writing to: Mrs. Antonia Stines antonia.stines@co.iredell.nc.us Purchasing Office 01/26/2024 1:00 PM - Friday, Last Day for Questions Repairs and work shall be accomplished per the following conditions and specifications noted below. Contractor shall be responsible for its own methods to ensure final product meets or exceeds the original design standards and specifications for the Transfer Station's finished product. Contractor shall propose a full concrete floor overlay. Repairs shall include removal and replacement of existing damaged concrete, and/or steel reinforcement. Contractor will limit the duration that the floor is deemed out of service including the required cure period to one weekend (Saturday & Sunday).
Provide temporary toilets as needed.
Demolition:
All areas to be removed/replaced must be saw-cut to create a clean, straight line with existing. Floor drain grates
should be preserved for reuse.
Prepare existing surface as required for floor replacement/repairs or overlay system.
Replacement/Repairs/Overlay:
Scope of work is based on dimensions of 75' x 80' and as noted in the scope of work as detailed below:
The volume of material included will cover approximately 6,000 SF at an average thickness of 2".
Saw cut and chip to create key at all termination points of the new flooring system.
Shot blast as required to remove any surface laitance and enhance bonding profile.
Mix and install 100% solids epoxy bonding agent and scrub into base slab as required. Set up screed system to specified thickness.
Mix, place, and finish EucoFloor 404 topping as required.
Install control joints as required.
Install curing compound as required.
Install burlap or like material for wet cure process.
Access to the work area from Friday afternoon through Sunday is assumed, with normal operations
resuming on the following Monday morning.
Contractor will provide a 5-year wear warranty.
.webp)
