This project provides for the rehabilitation of the existing Brookville Road Bridge over CSX Railroad. The existing Brookville Road Bridge, built in 1976, is a 123'-6" long, three-span, four steel rigid frame concrete deck structure carrying a 50-foot clear roadway with one 19'-6" lane in each direction and one 11' center-left-turn lane, plus a 7' concrete sidewalk and a one-foot concrete parapet with anti-climb chain link on both sides, for a total out-to-out bridge width of 66'. The structure is supported by two concrete abutments and eight concrete pier pedestals. The existing concrete deck will be reconstructed. The new concrete deck will carry a 41' clear roadway with two 11' lanes, one 7' striped median and two 6' shoulders, plus a 9' concrete sidewalk on the north side and a 14' concrete shared use path on the south side and a 1'-2" concrete parapet with anti-climb chain link on both sides, for a total out-to-out bridge width of 66'-4". The existing concrete abutments and slope protections and steel frames and bearings will be repaired. A 14' asphalt shared use path on the south side and a 1'-2" concrete barrier with moment slab on both sides will be constructed along the approaches between Talbot Avenue and Warren Street. Approximately 875 feet of asphalt approach roadway will be repaved to tie the bridge into the existing roadway. The project is include in the County 2025-2030 Capital Improvement Program (CIP) *Project information has been obtained through a public capital improvement plan (CIP). A CIP is a financial schedule for short- and long-range projects which is updated regularly. Information listed in the CIP often evolves based on funding availability and the project details, including timeline and value, are subject to change. The content management team will continue to pursue additional details as they become available.
.webp)
