Renovation of a residential development in Rock Island, Illinois. Completed plans call for the renovation of a residential development.

The City of Rock Island is requesting bids from contractors for a rehabilitation project at a house located at 2025 31st Street. This City of Rock Island property will be undergoing rehabilitation using Illinois Housing Development Authority funds to ameliorate deteriorating and deteriorated conditions. All work shall be subject to IDHA's approval and Environmental Protection Agency (EPA) regulations. Contractors who are interested in this project will need to schedule a site visit with the Home Owner Heather Proulx phone number 309-737-2467 , prior to submitting the bid. Scope of Work The bidder shall submit a project plan using the design standards below that is in compliance with all applicable IDHA, EPA, and State of Illinois regulations as well as all local building and zoning codes. The plan must include a clear project timeline and budget with line item costs. The contractor shall act as the general contractor for the project using subcontractors as required. Subcontractors that will be required should be clearly identified in the project plan. Alternative specifications shall be considered only if they are clearly justified, cost effective, and meet all project objectives. The contractor shall have 30 days to complete the work from the date of contract signing. Change work orders over the course of the project are strongly discouraged. Remove 4 basement window frames and sashes. Leaving the glass block windows untouched. Install new vinyl slider basement windows. Insulate with low expanding foam. Install a mortar sill, forming a slope right up to the new window frame assuring proper water shed away from the unit. If there is any exposed wood on the exterior then use white break metal to encapsulate and protect framing members. Remove and replace all the windows on the main level with new vinyl units. Set up a containment system around each unit being removed before work begins. Remove stops, sashes, along with any hardware in order to install windows. Insulate with low expanding foam between new unit and existing frames. Install new break metal on the exterior cover over the existing white coil. Caulk with white Quad when each unit is completed. Building permit is required before work starts.