Site work for a municipal facility in Alexandria, Louisiana. Completed plans call for site work for a municipal facility.

Deadline to receive written inquiries: 2/8/2024 Contractor shall furnish all labor, materials, tools, equipment, and supplies necessary to pour a concrete pad to match the existing pad on the opposite side of the entrance located at the security guard building entrance and install a new barrier arm gate system at the Central Louisiana Supports and Services Center. Forming and pouring concrete pad 18" x 18" x 6" depth. This pad will match existing pad on opposite side of the entrance by the security guard building. All equipment shall beDoorking or equivalent Install 2 barrier gate operators, 1/2hp 115v,one on each concrete pad. These mechanisms open the gate arms. Install twoaluminum arms 14ft. One arm will be installed on each concrete pad. These are the barrier arms that will open and close. Install two reverse edge hardware kits for the arms. This is a safety feature so the arms do not come down on any vehicles. Install DKS Doorking 8080-309 or equivalent lighted led reverse edge 9ft. on each arm so the arm can be seen at night. Install twocover barrier arm hubs - white in colorDoorking brand or equivalent. Contractor shall clean up of any debris from project and restore grounds to pre-work conditions. Contractor shall perform tests to confirm that the system is working properly. Contractor shall train maintenance staff and security guards on proper operation of newly installed barrier gate. Amount of bid bond required Amount of performance bond