Renovation of a swimming pool in Zion, Illinois. Completed plans call for the renovation of a swimming pool.

To remove existing pool heater and replace with new heater, as specified. Zion Park District Board of Commissioners reserves the right to reject any or all bids or to accept the bid most advantageous to Zion Park District. The Owner has determined that the work is subject to the Illinois Prevailing Wage Act. The Port Shiloh Pool is a seasonal public pool facility with two (2) individual pools, a Lap Pool (200,000 gallons) and an Activity Pool (40,000 gallons). Heater to be replaced was installed in 2019, and has reached its useful life and requires replacement. Current heaters are Raypak and are fueled by natural gas. The location for the heater is 1501 Shiloh Boulevard, Zion, IL 60099. Removal of existing fencing as needed to get existing heater out and new heater in place. Disconnect existing heater from the existing electrical supply, pool water supply and gas piping. Remove, haul away and legally dispose of existing heater. Furnish and install one (1) new Lochinvar CPN1802 pool heater with outdoor venting option. Reconnect existing electrical connections for heater and booster pump including reconnecting the existing bonding. Replace/Reconnect the existing CPVC pool water piping for the heater. Reconnect gas piping as required for new heater. Existing heater has 1.25” gas connection. New heaters require 2”, it is assumed that the main supply from the meter is 3”. Where it tees off to the heaters is 2” and will remain 2” to the new heater connection. Reinstall existing fencing as it was. Install temperature sensors and safety limiting devices as required. Start-up and confirm correct gas pressure, gas volume and operation of heater. Contact IDPH (Illinois Department of Public Health) for inspection once completed. If you have any questions regarding these specifications or procedures, please contact Rich Chirchirillo at 847-746-5500 Ext. 1421, or email at rchirchirillo@zionparkdistrict.org.