This is a service / maintenance or supply contract in Schaumburg, Illinois. Contact the soliciting agency for additional information.

This project requires 26% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on May 2, 2024, at 12:00 PM at the Region One/District One Office in Schaumburg. Phase III engineering services are required to provide construction engineering for subject improvement. Work includes, but is not limited to, services to assist department resident engineers/technicians on various construction projects throughout the District One area. Eight (8) to twelve (12) engineers and /or engineering technicians are anticipated to be required during the 2024 and 2025 and 2026 (if applicable) construction seasons. Typical assignments would include, but are not limited to, general construction inspection, project finalization and documentation, including PCC & bituminous concrete paving operations, drainage, patching, bridge structures, bridge painting and providing general assistance as a member of a field crew. Survey/layout services may be required. The Consultant will furnish a Project Manager and an adequate staff to perform the duties required to fulfill the engineering requirements in accordance with the departmental policies. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The completion date for this contract will be 18 months after authorization to proceed. The Prime firm must be prequalified in the Special Services (Construction Inspection) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS). The method of contractor selection has not been determined at this time. IDOT - 03 - RFQ - Various Construction Inspectors, Phase III Project