Renovation of an educational facility in Troy, Ohio. Completed plans call for the renovation of a 13,853-square-foot, two-story above grade educational facility.

A. Roof Membrane Removals and Other Removal Summary 1. Roof Areas A and B as shown: Remove the entire roof system down to the existing metal deck. See existing roof matrix on the drawings for system existing components and alternates. 2. Roof Area C as shown: Remove the entire roof system down to the existing concrete deck. See existing roof matrix on the drawings for system existing components and alternates. B. Clean roof / deck surface of all debris detrimental to installation of new roof system, including cleaning of metal deck flutes, etc. C. Removal of existing perimeter base flashing material [metal, BUR, composite and single ply as applicable] and from associated equipment supports and related items. 1. Locations where wall flashing heights are below the manufacturers requirements shall be raised or use liquid flashing system if approved by the manufacturer. D. Removal of wood nailers and blocking. Wood members that are securely bolted or adequately fastened or can be adequately fastened to the structure per specs and are in a dry good condition can remain in place. Remove deteriorated and damaged wood members. [See section 06 10 53 for anchoring requirements]. E. Removal and reinstall existing electrical conduits, cable lines and associated wall attachments. A. Direct questions in writing to Jonathan Schaaf, JRS@rda-group.com. B. Verbal answers are not binding on any party. C. Submit questions not less than 5 days before date set for receipt of Bids. Replies will be made by Addenda. Troy High School Partial Roof Replacement Project 2024