Renovation of an elderly care / assisted living facility in Middle River, Maryland. Completed plans call for the renovation of a elderly care / assisted living facility.

Baltimore County is seeking exterior window replacement and glazing at the Victory Villa Senior Center. Questions will be entertained at the conference and via e-mail to Monica Lee, Staff Buyer, at mlee3@baltimorecountymd.gov. Question Deadline 04/08/2024 The deadline for written questions pertaining to this solicitation is seven (7) working days prior to the due date of proposals. 1.1 It is the intention of these specifications that the Contractor hereunder shall furnish all labor, material and equipment for Exterior Window Replacement/Glazing at Victory Villa Senior Center located at 403 Compass Rd, Baltimore, MD 21236. 1.2 The County reserves the right to order such services as may be required during the said period, and it also reserves the right not to order any services bid upon by the Contractor, if it is found that such services are not required by the County during the period covered by this contract. 2.1 Provide all labor, material and equipment necessary to perform: 2.1.1 Fabrication, replacement and installation of exterior window glazing. 2.1.1.1 Replace glazing in all external windows in the building, including the exterior clerestory windows above the central reception area. 2.1.1.2 All existing exterior glass is to be removed, disposed of and replaced with double pane insulated glass, not disrupting the existing aluminum frames. 2.1.1.3 New Insulated Glazing for all exterior windows. 2.1.1.3.1 All Glass- No Plexi-Glass panels of any kind. 2.2 Minimal requirements for exterior replacement windows and glazing: 2.2.1 Provide double pane, gas filled, low-E glass 2.2.2 Maximum U-factor (overall assembly) of fixed windows shall be 0.34. 2.2.3 Maximum U-factor (overall assembly) of operable windows shall be 0.43. 2.2.4 Maximum SHGC of glazing in fixed windows shall be 0.34. 2.2.5 Maximum SHGC of glazing in operable windows shall be 0.31. 2.2.6 Minimum ratio of VT/SHGC (all types) shall be 1.10. 2.2.7 All new glazing to include thermal breaks. 2.2.8 All new glazing to have factory-applied finish. 2.2.9 Provide National Fenestration Rating Council (NFRC) label or label certificate for window assembly. 2.3 Window treatments and valances will be removed and reinstalled by others. 2.4 Identify in writing and photos all damaged wall or ceiling areas before construction begins. Damaged walls not identified prior to commencement of work will be the responsibility of the contractor to repair, paint and wallpaper to match, as needed. 2.5 Remove all existing "plexiglass" panes and ALL caulking that was used to install them. There will not be any plexiglass in any windows when this project is completed.