Specbook: 2016 raised rumble strips, striping, and related work.
Parish(es): Livingston; St. Helena
Route(s): LA 1025; LA 1026; LA 16
Federal Number: H015690
Estimated Construction Cost: $1,000,000 to $2,500,000 All questions concerning the plans shall be submitted via the Electronic Plans Distribution Center known as Falcon. All submitted questions will be forwarded by email to the Project Manager and the Project Engineer. Questions submitted within a period of 96 hours prior to the advertised time for the opening of bids, excluding Saturdays, Sundays, and any other legal holidays, may not be answered prior to bidding. Falcon may be accessed via the Internet. From the home page, select BUSINESS Working With DOTD, then select Project Letting Info. On the Construction Letting Information page, select the link, DOTD Plan Room (Falcon); Login to Falcon (or request an ID if a first-time user). Once logged in, you will have access to view Project Information, submit a question concerning the project, and view the plans. To avoid any suggestion that a potential bidder is using the Falcon system to communicate with other potential bidders, DOTD will not post any question or any statement of fact or opinion not made for the purpose of seeking clarification of plans and/or specifications. Any non-questions posted on falcon will be limited to the statement of an issue considered unresolved by a previous DOTD response. LADOT - Dist 62: Raised Rumble Strips Evaluation *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. DESCRIPTION
Furnish and place Class II base course on a prepared surface in accordance with
these specifications, in conformity with the lines, grades, thickness, and typical
sections shown on the plans or established by the engineer. Control the selection,
placement, mixing and compaction of materials so that the completed base course is
uniform and conforms to plan dimensions and other acceptance requirements.
Quality assurance requirements shall be as specified in the latest edition of the
Department’s publication titled Application of Quality Assurance Specifications for
Embankment and Base Course.
Unless approved otherwise in writing, use the same base course material
throughout the project in accordance with these specifications.
Immediately prior to application of base course on existing pavement, remove
raised pavement markers at no direct pay.
When asphalt concrete or portland cement concrete is specified on the plans, the
total thickness of asphalt concrete or portland cement concrete shall be the thickness
as indicated on the plans
.webp)
