Renovation of an educational facility in Walland, Tennessee. Completed plans call for the renovation of a educational facility.

Questions Deadline: 3/15/2024 04:30 PM (ET) It is the intent of this Invitation to Bid for removal, clearing, and re-roofing of the Walland Elementary School. This project shall include all labor, materials, supplies and any permits or other documentation required to complete the project as specified on the Drawing and in the Bid Documentation. See the Attachments tab for the Drawing and Project manual. See the attributes tab for general and project specific questions. See the Activities tab for Pre-bid, Vendor questions, and Bid opening information. Vendors are encouraged to register with Blount County and submit their response through the online bidding system at this same link. If you have any issues registering in the online system, contact the IonWave help desk at 866-277-2645, ext. 4, support@ionwave.net, or Blount County Purchasing, 865-273-5740, purchasing@blounttn.org. Bid Responses are not accepted via email or fax. Bidders must allow ample time to submit their response. No information may be submitted or modified beyond the Response Deadline Date / Time. When registered, vendors may submit questions via the Questions tab for this ITB in the online bidding system. Please make note of the question deadline. Prior to bid submission, it is the bidder's responsibility to access the online bidding system and ascertain they have received any addenda and viewed answers to published questions and bid accordingly. All questions related to bid are due March 8, 2024 at 4:30 PM. Technical questions regarding this bid can be directed to: purchasing@blounttn.org The Work includes the provision of all labor, material, equipment, management, coordination, supervision and administration to complete the Work as outlined. B. The Contractor shall complete the following work. The following outline of work is noted by System. The work to be completed is the Base Bid (Roof Sections A ONLY). The work includes, but is not limited to the following: 1. System #1 (Roof Section A) a. Remove all existing roofing, insulations, and accessories down to the LWC deck. b. Allow the existing LWC deck surface to dry before attaching base sheet (1 hour). c. Repair any wet LWC decking as per the provided roof scan report on a Unit Price basis. d. Mechanically attach one layer venting base sheet to the LWC deck. e. Adhered 1/8" Polyisocyanurate taper system with 1.5" start to the base sheet with low rise foam adhesive at the specified rates. f. Fully adhere PVC-KEE single ply membrane to the Polyisocyanurate taper system. g. Install all new wall, perimeter, and roof penetration flashings. h. Install new 24-gauge Kynar finish metal edge, gutters, downspouts, wall flashings, and counter flashings as designed. i. Provide manufactures 20 year Edge to Edge No Dollar Limit roof warranty. j. Provide contractors 2 year labor warranty.