Site work and renovation of a water / sewer project in Tampa, Florida. Conceptual plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

University Pumping Station - Rehabilitation Design. the City Must Submit a Single Electronic File in Searchable Pdf Format, Smaller Than 10mb, That Includes the Attached Rfq Transmittal Memorandum Completed as Appropriate, a Letter of Interest Addressed to Brad L, Baird, P.e., Chairman, and Referring to This Rfq by Number, Together With a Statement of Qualifications and Any Supplemental Material Allowing Evaluation for Further Consideration (Short-listing) Based Upon the Following Criteria/point System: Successful Comparable Project Experience, (35 Pts); Qualifications (30 Pts); Workload and Availability (5 Pts); Past Performance/low Amount of City Work (5 Pts); Standard Form 330 or Similar Data (5 Pts) "ban-the-box"(5pts); Planned Wmbe/slbe Solicitation & Utilization, Form Mbd 10 & 20 (20 Pts). The Rehabilitation Shall Include but is Not Limited to the Following: Replacement of All Pumps, Valves, Fittings, and Deteriorated Station Piping; Replacing Electrical and Control Systems Including a New Emergency Standby Generator, Teco Transformer, Main Circuit Breaker, Motor Control Center, Automatic Transfer Switch, Annunciator/plc Cabinet, Vfds, Level Controls, and Flow Meter With Transmitter Cabinet, and Improvements to Automatic Bar Screen System. Selection of Pumps and Pumping Strategy Shall Provide a Station Peak Wet Weather Pumping Capacity of 25-30 Mgd and the Daily Flow Requirements. The Pump Selection and Pump Strategy Shall Be Designed to Maximize Energy Efficiency Using Variable Speed Controls and Shall Be Capable of Being Installed Using the Station's Current Wet Pit/dry Pit Configuration. The Design Services Shall Include, but Not Be Limited to, Assessment of Equipment Replacement Needs, Development and Analysis of Alternatives for Pumping Strategy and Current and Future Flow Requirements, Equipment Selection and Layout, Construction Sequencing, and Associated Cost Estimates; Preparing Contract Documents for the Selected Alternatives, Including Signed and Sealed Construction Plans With Electrical Instrumentation and Controls, Specifications, Final Construction Cost Estimate, Preparation of Construction Documents for Bidding, Submittal and Tracking of All Regulatory Permit Applications, Shop Drawing Review, and Associated Activities Required During Construction. The Design Services Will Also Include Developing a Sequence of Operation, Bypass Pumping Requirements, and the Construction Requirements So That Wastewater Flow is Maintained Throughout the Construction of the Rehabilitation. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Estimated Total Constructed Project Cost $25 Million to $40 Million. The method of Contractor Selection has not been Determined at this time.