Site work and paving for a mixed-use development in Napa, California. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

The project scope includes removing debris from the roadway and parking areas, providing digout repairs, repairing existing drainage gutters, installing new AC dike (where applicable), conform grinding, resurfacing the entire width of the road and parking areas, and striping select roadways. Refer to Section C - Technical Specifications, Section 1-1.02 Summary of Work. One (1) lane of traffic control will be required during repair and resurfacing activities. All construction activities and resurfacing, including any temporary staging, shall occur within Napa Countys right-of-way, unless directed otherwise by the Engineer. Hours for work are from 7 A.M. to 5 P.M. Refer to the Plan Sheets for the limits of work and additional details. This work includes sole sourced 3M signage material for the purpose of conformity. The scope of work shall include and not be limited to: Mobilization Construction Staging Area Setup and Debris Disposal; Implementation on Erosion and Sediment Control Best Management Practices (BMP); Construction Area Signs per CAMUTCD standards (most recent online version), Caltrans Special Provisions, and as directed by the Engineer; Temporary Traffic Control per CAMUTCD standards (most recent online version), Caltrans Special Provisions, as directed by the Engineer; Utility adjustment (raise to grade) is anticipated; Resurfacing as specified on the Plans; Installing Thermoplastic Striping after resurfacing; Removing and replacing blue Reflective Pavement Markers (RPM) at fire hydrants; Final cleanup and demobilization; Project Closeout; and Auxiliary work shown on the Plans and as directed by the Engineer. All questions must be mailed, faxed, or e-mailed to Sydney Barclay (sydney.barclay@countyofnapa.org) at Napa County Public Works, 1195 Third St. Room 101, Napa, CA 94559, Fax No. 707-299-4283 by April 3, 2024, 5:00 P.M. Question Deadline 04/03/2024 at 5:00 PM PT Last Day for Questions. In accordance with California Public Contract Code Section 3400, bidders may propose equals of products listed in the technical specifications or project plans by manufacturer name, brand or model number, unless the technical specifications or plans specify that the product is necessary to match others in use. Complete information for products proposed as equals must be submitted to the Public Works Office for review at least ten (10) days before the time specified for bid opening. In accordance with Section 1771.1 of the Labor Code, a contractor or subcontractor shall not be qualified to bid on, be listed in a bid proposal, subject to the requirement of Section 4104 of the Public Contract Code, or engage in the performance of any contract for public works, as defined in this chapter, unless currently registered and qualified to perform public work pursuant to Section 1725.5. It is not a violation of this section for an unregistered contractor to submit a bid that is authorized by Section 7029.1 of the Business and Professions Code or by Section 10164 or 20103.5 of the Public Contract Code, provided the contractor is registered to perform public work pursuant to Section 1725.5 at the time the contract is awarded.