BLOCK PAGE!!!

Subscribe For Access

Privately Funded

Bidding Soon

Documents Available

Publicly Funded

Addenda Available

Post-Bid

Saving Project...

This is a service / maintenance or supply contract in Fort Bragg, North Carolina. Contact the soliciting agency for additional information.

As per the Owner the Project has been cancelled. Editorial Content Team is actively seeking updated information Original Set Aside: Total Small Business Set-Aside (FAR 19.5) Product Service Code: C211 - Architect and Engineering- General: Landscaping, Interior Layout, and Designing NAICS Code:541310, "Architectural Services" 541320 - "Landscape Architectural Services" 541330 "Engineering Services" Place of Performance: Fort Liberty, NC 28310 USA Special Notice - Notices of Intent to contract for Architect-Engineering (A-E) services for FY24 Fort Liberty, North Carolina. Mission Installation Contracting Command - Fort Liberty (MICC - FL) has received multiple requirements/ project(s) from Fort Liberty Directorate of Public Works (DPW) that require multidisciplinary professional design services, Architect Engineering Services to complete design documents on the Installation for FY22 that are estimated below the Simplified Acquisition Threshold (SAT). (see A-E attachment "Project list"). These requirements/project(s) shall include performing building surveys, developing scopes of renovation work and cost estimates. The requirement consists of performing all Architectural - Engineering (A-E) services necessary to prepare 100% plans and specifications for a Design-Bid-Build package. Since the projects are all estimated below SAT, the Contracting Officer will use equitable distribution based on number to the most highly qualified firms from the evaluation. This notice is subject to availability of funds. This public notice is set aside to Small Business Firms Only and does not require a small business contracting plan. We encourage all A-E small businesses, in all socioeconomic categories including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women-Owned Small Business concerns, to identify their capabilities (SF 330 along with a capabilities statement); the capabilities statement is limited to no more than 2 x pages). Only firms with an active registration in SAMS will be acceptable. The Fort Liberty list of qualified A-E firms is outdated. We request all SB firms, even if they previously submitted interest in either a sources sought or a special notice posted by MICC FL, to send updated required documents requested to be considered. Any questions from this notice will end on 15 April 2024 at 10am. Email firms consolidated questions to person(s) identified in this notice; Firms shall use the firm's government POC or Owner listed in SAMS to send the questions from the firm. An attachment with all consolidated questions with government response will be included in this notice and updated regularly to help prevent duplicate questions being received. This notice does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFL)/Request for Proposal (RFP) or a promise to issue an RFQ, IFL or RFP in the future. This notice does not commit the U.S. Government to contract for any construction or design service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. The NAICS code is 541310, "Architectural Services" with a size standard of $12.5M is listed on this special notice, however, NAICS codes 541320 "Landscape Architectural Services" size standard $9M and NAICS code 541330 "Engineering Services" size standard $25.5M are also being considered. Regardless of NAICS code selected, the Classification Code for all requirements listed is C-Architect and Engineering Services. Interested firms shall respond with the following documents, below, by email to the individual(s) identified in this notice: SF 330 Parts I and II and General Capabilities Statement (no more than 2 pages) Confirmation SAMS registration is current and correctly identifies the Firms Point of Contact: Name, Number and Email for government contracts. If the Firm is an Active 8(a) Firm, a document identifying when they will exit the program. Submittals will not be returned to the responder. Interested firms will be evaluated per The Brooks Act" (Public Law 92-582, 40 U.S.C. 541 et seq.) and DFARS PGI 236.602 Selection of firms for architect- engineer contracts. Specifically, PGI 236.602-1(a)(6). The selection(s) of the most highly qualified firms is not based upon competitive bidding procedures but rather upon professional qualifications necessary for the performance of the required A-E services. NOTE: Determining Highly Qualified, Qualified and Unqualified Adjectival Rating Description Highly Qualified, SF330 demonstrates professional qualifications necessary, specialized experience and technical competence, capacity to accomplish the work in the required time, relevant and recent work history. Qualified, SF330 demonstrates professional qualifications, experience and technical competence, capacity to accomplish the work, some relevant and recent (within past 5 years) work history. Unqualified, SF330 does not demonstrates professional qualifications necessary and/or specialized experience and technical competence, capacity to accomplish the work in the required time. Any relevant and recent work history is greater than 5 years. Evaluation/Selection Criteria (1-6): The criteria is listed below in descending order of importance. IAW FAR 36.602-1(a), Agencies shall evaluate each potential firm in terms of its- Factor 1 - Professional Qualifications: All key personnel shall be licensed in North Carolina; resumes and copies of credentials shall be provided for the following key personnel: Architect, RA Civil Engineering, PE Civil Communications Designer, PE Electrical and Computer, RCDD Electrical Engineering, PE Electrical and Computer Environmental Engineering, PE Geotechnical Engineering, PE Interior Designer, NCIDQ Land Surveyor, PLS Landscape Architect, RLA LEED Accredited Professional, LEED BD+C Mechanical Engineering, PE Mechanical Project Manager, PE Qualified Fire Protection Engineer, PE Fire Protection Quality Assurance Management, PE Structural Engineering, PE Structural The factor shall include an organizational chart and a narrative describing how the team will function including key personnel leadership roles. Functions to be subcontracted shall be clearly identified by subcontractor. Factor 2 - Specialized Experience and Technical Competence: Firms shall select 3 projects for submission that demonstrate their Specialized Experience and Technical Competence. All submitted projects must have been completed within the last five years from date of special notice announcement. Firms shall provide a narrative of work performed and their quality control procedures, and the following shall be listed for each project: Distance of Project from Fort Liberty in miles. Estimated Construction Cost of the Project in USD. Design Period of Performance in Months. USACE AHJ District. LEED Certification Level. Number of Project Review Comments for each stage of submission. List of Key Personnel involved in the project from Factor 1. Unified Facility Criteria and Buildings Codes Applicable to the Project. North Carolina Department of Natural Resources (DNR) Permit Requirement. National Environmental Policy Act (NEPA) documentation required. The factor shall include a Design Schedule outlining each submission stage and overall schedule, A-E Cost proposal for the submitted projects. Factor 3 - Geographic Proximity: Proximity in miles of the principal design office to Fort Liberty, NC, and key personnel subcontractors. Factor 4 - Past Performance: Past Performance during the past five years from date of the pre-solicitation notification on similar contracts with respect to cost control, quality of work, compliance with performance/design schedules, customer satisfaction, management, and safety/security as determined from Contractor Performance Assessment Rating System (CPARS) and other sources such as past performance questionnaires. The evaluation of past performance will be based on information provided through CPARS and may include other information provided by the firm, customer inquiries, Government databases, and other information available to the Government including information from the points of contact provided by the Firm. Failure to provide requested data, accessible points of contact, or valid phone numbers may result in a firm being considered less qualified. NOTE: In lieu of requesting past performance information, the Contract Performance Assessment Reporting System (CPARS) will be used for an Acceptable or Unacceptable rating only. If a firm does not have any past performance in CPARS, they will receive an Acceptable rating. Acceptable will be based on the offeror's performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror's performance record is unknown. An Unacceptable rating will be based on the offeror's performance record, the Government does not have a reasonable expectation that the offeror will be able to successfully perform the required effort. Note: Relevancy Rating will be included in the comments only in Past performance: (Very Relevant, Relevant, Somewhat Relevant, Not Relevant). Very Relevant: Past Performance effort involved is essentially the same scope and magnitude of effort and complexities of this design requirement. Relevant: Past Performance effort involved similar to the same scope and magnitude of effort and complexities of this design requirement Somewhat Relevant: Past Performance effort involved some of the same scope and magnitude of effort and complexities of this design requirement. Not Relevant: Past Performance effort involved little to none of the same scope and magnitude of effort and complexities of this design requirement. Location in the general geographical area of the project and knowledge of the locality of the project; provided, that application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the project; and NOTE: In this section evaluation should be in terms of working on Fort Liberty or other military or government locations. It is recommended Firms, on their capabilities statement, to indicate the Firm Business Headquarters and (if applicable) the closest Field Office location (miles away from zip code 28310) with respects to Fort Liberty Installation. Acceptability under other appropriate evaluation criteria - Historical Registry NOTE: In this section firms should indicate if they have worked on historical buildings or those able to be included on the registry.

Final Planning

Military

Public - Federal

Service, Maintenance and Supply

Plans and Specifications are not available for this project. If that changes, they will be made available here.

Subscribe For Documents

3 Record(s)

Subscribe for All Details

Trades Specified

Division 00 - Lorem Ipsum

Division 00 - Lorem Ipsum

Lorem, Ipsum, Dolor, Sit amet

Find More Local Projects

Within 75 Miles of This Project
146
Active Projects
63
Bidding Soon
1,239
All Active Projects
455
Updated Recently

You’ve Reached the Free View Limit

Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.

Come back in [[refresh_days]] to get [[project_count]] more free projects.

December 31, 2024

img_map_placeholder

Multiple Locations, Fort Bragg, NC


The data you need to build the relationships you want. Try it free.

Access Now

Get the right
data with Project Intelligence

Share with your network.

Project Shared

with

example@example.com

Upgrade now for industry‑leading commercial construction data.

You've reached the free-view limit.

Thousands of projects are added every week - don't miss out. Explore the best product options for your business and subscribe today.

Get Access Now

Choose what you would like to do.

Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.

Fuel growth with access to the bidding project info your business needs.

Full details, including key contact information, important dates, plans and specifications, on over 500,000 Projects including 5000 updated daily available to subscribers.