Site work for a bridge / tunnel in Pagosa Springs, Colorado. Conceptual plans call for site work for a bridge / tunnel.

Reference Number 0000346126 The Town of Pagosa Springs is accepting proposals for the pre-fabrication and delivery of the 1st Street Pedestrian Bridge. Pedestrian Bridge Details. This work consists of the design, fabrication, and delivery of a 150-0 long by 8-0 to 10-0 clear width simple span (see width options outlined in section III. 1. h. of the RFP), welded self-weathering steel (ASTM A 709 Grade 50W), pedestrian truss bridge with decking options as outlined in section III. 1. h. of this RFP. The pedestrian bridge structure shall consist of a Half Through Underhung Truss, which has one (1) diagonal per panel and plumb end vertical members. The distance from top of deck to the point of low steel shall not exceed 48 inches. The top chord shall be 54 inches above the deck with minimum deviations determined as necessary for bridge design (measured from the high point of the riding surface). Delivery Point: 451 Hot Springs Blvd Pagosa Springs, Colorado United States 81147. Question Acceptance Deadline 03/28/2024 12:00 AM MT Questions are submitted online No, Any requests for clarification or additional information deemed necessary by any respondent to present a proper proposal shall be submitted in writing to David Hilborn, Project Manager, at PO Box 1859, Pagosa Springs, Colorado, 81147 or dhilborn@pagosasprings.co.gov, Buyer Preferences, Guidelines & Requirements General Requirements - Bidder Prequalification/Preregistration Required - Certification/Training - Contractors License Required - Insurance Required - License Required The Town of Pagosa Springs reserves the right to accept or reject any or all proposals received as a result of this request, to negotiate with any qualified source, or to cancel in part or in its entirety the Request for Proposals, if it is in the best interest of the Town of Pagosa Springs, Colorado.