Site work and paving for a road / highway in Ashley, North Dakota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Proposed Work Consists of 5.1613 Miles of Mill and Overlay, Contract Patching Located Nd 13, Wishek E to E of Jct Cmc 2621 (Near 45th Ave Se) And I-94, 2.5 Mi East of Medina - Eb And Involves Approximately: 1 L Sum Contract Bond; 100 M Gal Water; 9.56 Mile Shoulder Preparation; 3555 Ton Salvaged Bituminous Pavement; 4323 Gal Tack Coat; 4935 Ton Milling Pavement Surface; 10022 Ton Rap - Superpave Faa 42; 121 Ton Commercial Grade Hot Mix Asphalt; 81 Ea Cored Sample; 480 Ton Pg 58s-34 Asphalt Cement; 1 L Sum Mobilization; 280 Mhr Flagging; 2509 Unit Traffic Control Signs; 2 Ea Portable Rumble Strips; 2 Ea Type Iii Barricade; 28 Ea Delineator Drums; 293 Ea Tubular Markers; 1 Ea Sequencing Arrow Paneltype C; 100 Hr Pilot Car; 1 Ea Bituminous Laboratory; 1 Ea Contractor's Laboratory; 7.816 Mile Sinusoidal Rumble Strip - Asphalt Shoulder; 3.908 Mile Sinusoidal Rumble Strip - Asphalt Centerline; 48056 Lf Short Term 6in Line-type Nr; 69467 Lf Pvmt Mk Painted 6in Line; 300 Lf Pvmt Mk Painted 12in Line; 30 Lf Pvmt Mk Painted 24in Line. *** End of Project 24097*** DBE Goal = 2% Time : August 30, 2025 Bid Range - $1,000,001 to $1,500,000 Prequalification is required for all bidders submitting a bidding proposal form. Prequalification is required annually. Prequalified contractors who wish to renew their prequalification must submit a complete "Contractor's Prequalification Statement" by July 1 of each calendar year. Bidders who are not currently prequalified must submit a complete "Contractor's Prequalification Statement" at least 10 business days prior to the date of the bid opening. Information is available from the Construction Services Division of the North Dakota Department of Transportation. Contractor's License--A contractor is not required to have a license from the state of North Dakota before bidding on any project, however, no contract will be awarded unless said contractor holds a current North Dakota license in the class within which the value of the contract falls. Contractors are required to meet the provisions of the Contract Work Hours and Safety Standards Act on the federal aid projects, are required to meet the Fair Labor Standards Act on all projects, and are required to pay any minimum wage rates set forth in the proposal form. A bid guarantee is required by Section 24-02-20, NDCC. The bid guarantee may be a bid bond equal to 10 percent of the full amount of the bid or a cashier's check of the bidder on a solvent bank equal to 5 percent of the bid. Bid bond shall be on the department form SFN 14196. Prior arrangements may be made with the department to file bid guarantees in advance. The Department of Transportation and all bidders are obligated to affirmatively ensure that in any contract entered into pursuant to this advertisement, minority or women's business enterprises will be afforded a full opportunity to participate and to submit bids in response to this invitation and will not be discriminated against on the grounds of race, religion, color, sex, age, or national origin in consideration for an award. Where applicable the contractor must fulfill all special provision requirements for utilization of Disadvantaged Business Enterprises. The right is reserved to reject any and all proposals, to waive technicalities, or to accept such as may be determined to be for the best interests of the state. NDDOT - Job No - 24097 - Mill & Overlay and Contract Patching *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.