This is a service / maintenance or supply contract in Iqaluit, Nunavut. Contact the soliciting agency for additional information.

The City of Iqaluit Department of Public Works and Engineering (the City) is issuing a Request for Tender (RFT) for qualified Proponents to provide the services as outlined in this RFT document. The purpose and objective of this project is to provide sewer/wastewater line cleaning and conducting CCTV camera survey for assessment of sewer pipes. Location Iqaluit is the capital of Nunavut and is located at the south end of Baffin Island, Frobisher Bay 6431'N latitude and 6831'W longitude. Access to Iqaluit is provided by regular scheduled commercial aircraft year round, snowmobile trails from other Baffin Island communities in the winter, and sealift from the port of Montreal in the summer Bid(s) should be addressed to; Oyefeso Ayomide, Project Officer of Engineering and Capital Planning City of Iqaluit A.Oyefeso@iqaluit.ca The City of Iqaluit is issuing this Request for Tender (RFT) to seek proponents to complete sewer cleaning and Closed Circuit Television (CCTV) inspection. The CCTV operator shall be certified as per the NASSCO PACP/CSA Plus 4012-10 standard (Proof of certification will be requested for). The work includes sewer cleaning to ensure a clean pipe free from obstructions and sewer televising to provide full-colour digital video, database and report to be utilized by the City of Iqaluit to evaluate maintenance and rehabilitation options. Further details relating to the general scope of the project are provided below: Execution The pipelines, access vaults and manholes shall be cleaned and flushed prior to CCTV inspection Sludge, dirt, sand and debris resulting from the cleaning operations shall be removed from the downstream manhole of the segment. The liquid portion of material removed at the manholes shall be returned back into the sewer. The solid and semi-solid material removed at the manholes shall be disposed of at a designated site as approved by the City of Iqaluit. A vacuum truck equipped with a jetter is required to clean the manholes, access vaults and pipelines The maximum allowable water level within a pipeline, during inspection, is 20%. The jetter operator is required to bring down the water level where any part of any pipe exceeds 20% After cleaning the service pipes should be returned to a minimum of 85% capacity The jetter operator must employ a flush and follow method of inspection where the inspection camera follows a short distance behind a water jet. The water jetter will lower standing water in front of the camera and allow for more thorough inspections. During the inspection, the camera operator shall pan the camera to focus on observable deficiencies in the pipeline that may be located off-center to the direction of camera travel. This shall include, but not be limited to, all services, joints to the top, left or right, cracks and fractures or surface deterioration of the pipe walls. Pan and tilt into each service connection. Any issues that arise such as collapses must be reported to the City's Public Works Department immediately The execution of the sewer cleaning will be coordinated with the City's Public Works Department Question Deadline 04/03/2024