Renovation of an educational facility in West Chicago, Illinois. Working plans call for the renovation of a educational facility.

As of April 15,2024, no bids were received, no information for rebid. The Board of Education of Community High School District 94 will be accepting sealed bid proposals for Community High School District 94 Main Gym Floor Refinishing, which includes sanding, repair, refinishing, sealing, and painting. Further information may be obtained from the Community High School District 94 Administrative Office. Please call Dan Oberg at (630) 876-6220. Scope of work includes sanding, repair, refinishing, sealing and painting of our main gym floor, which includes approximately 14,225 Net Square Feet. (a) Repair approximately 20 locations of boards with dead spots using caps or other recommended process. (b) Sand wood floor bare maple strip wood - tack clean. (i) The entire gym floor shall be machine and hand sanded as necessary to remove all existing game lines and finishes, and to a smooth surface. Contractor must use a minimum of 3 (40, 60 & 100 grit) types of sandpaper, and the floor must be sanded until it is uniformly dull. (c) Refinish the gym floor by applying (2) coats of sealer & (2) coats of finish. (i) Apply one coat of seal and allow to dry. (ii) Machine buff, vacuum and tack (iii) Apply second coat of seal and buff the floor (iv) Apply the gamelines an graphics and allow to dry (v) Abrade paint and buff. (vi) Apply one coat of floor finish and allow to dry (vii) Buff with steel wool and tack rag (viii) Apply a second coat of floor finish and allow to dry. (d) Final dusting and cleanup of areas will be the by the owner. (e) The game lines and graphics shall be applied to match owner-approved drawings (f) The courts shall meet the requirements of the appropriate athletic associated as directed by the owner. (g) Line colors shall be selected from the manufacturer's standard colors as determined by the owner and the contractor. (h) All work is to be in accordance with the Maple Flooring Manufacturer's Association (MFMA) guidelines and recommendations. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The budget is between $50k and $100k