Site work for an educational facility in Calabasas, California. Completed plans call for site work for a educational facility.

***As of May 8, 2024. Project has been awarded but award amount is not available yet. All bids shall be made and presented only on the forms presented by the District. Following the closure of the informal bid submittal period, proposals will be opened and publicly read aloud at the above stated time and place. Any bids received after the time specified above or after any extensions due to material changes shall be returned unopened. Contractor's License Classification Required: A, B, or C12 The Contract Time is 54 days from the date of the Notice to Proceed. June 22nd, 2024 to August 15th, 2024 This Project is being let in accordance with the informal bid requirements of the California Uniform Public Construction Cost Accounting Act ("CUPCCAA") set forth in Public Contract Code section 22000 et seq. (specifically, the informal bidding procedures in Section 22032(b)). Bidders shall comply with any requirements set forth in the CUPCCAA including all guidelines and requirements in the current California Uniform Public Construction Cost Accounting Commission Cost Accounting Policies and Procedures Manual. All contractors submitting bids must be on the District's current list of approved contractors pursuant to Public Contract Code section 22034. Each bidder shall be a licensed contractor pursuant to the California Business and Professions Code, and be licensed to perform the work called for in the Contract Documents. Contractor's Subcontractors shall be licensed pursuant to California law for the trades necessary to perform the work called for in the Contract Documents. Each bid must strictly conform with and be responsive to the Contract Documents as defined in the General Conditions. The District reserves the right to reject any or all bids or to waive any irregularities or informalities in any bids or in the bidding. PROJECT DESCRIPTION The electrical drawings are diagrammatic and do not necessarily show all raceway, wiring, number or types of fittings, offsets, bends or exact locations of items required by the electrical systems. Items not shown or indicated, which are clearly necessary for proper operation or installation of systems shown, shall be provided at no increase in contract price. The exact routing of systems and location of devices and equipment shall be governed by coordination with other trades, structural, and architectural conditions. The local agency Inspector reserves the right, at no increase in contract price, to make reasonable changes in location of electrical equipment or wiring system so as to coordinate with other systems, to group them into orderly relationships, or to increase their utility. Contractor shall verify requirements in this regard prior to roughing-in. Install electrical work in cooperation with other trades, make proper provisions to avoid interferences, and coordinate with structural and architectural features in a manner approved by the local agency Inspector. All changes caused by neglect to make such provisions shall be at Contractor's expense. Provide offsets and special fittings, as required to facilitate installation of the work. When a particular product or type of product is specified with a manufacturer's designation, the latest published specifications, installation, and construction information of the manufacturer shall constitute the minimum acceptable standard. Any substitutions shall be made in accordance with subsection "Submittals." Project Description: Installation of terrace drain and slope repair at Lupin Hill Elementary School, including demolition and removal of existing structures and pipes, reconstruction of connections and stabilization and per plans.