Site work and paving for a civil project in Monona, Wisconsin. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

The Project includes the following Work: Reconstruction of approximately 300 linear feet (LF) of asphalt driveway as well as approximately 300 LF of new gravel driveway near the Monona water tower. The project also encompasses multiple streets of mill and overlay, approximately 16,000 square yards with casting adjustments. The Bid must be accompanied by Bid security made payable to OWNER in an amount of 10% of the Bidders maximum Bid price. The City of Monona reserves the right to reject any or all Bids, to waive any technicality, and to accept any Bid which it deems advantageous. All Bids shall remain subject to acceptance for 85 days after the time set for receiving Bids. PROJECT SCOPE A. CONTRACTOR shall provide all items, articles, materials, operations or methods mentioned or scheduled on the Drawings or herein specified: including all labor, supervision, equipment, incidentals, taxes, and permits necessary to complete the Work as described within the Contract Documents. CONTRACTOR shall install all items provided by OWNER as mentioned or scheduled on the Drawings or herein specified. 1.03 CONTRACT DOCUMENTS-INTENT AND USE A. Intent of Documents: 1. Singular notations and specifications shall be considered plural where application is reasonably inferred. 2. Mention or indication of extent of work under any division or Specification section is done only for convenience of CONTRACTOR and shall not be construed as describing all work required under that division or section. 3. Some individual sections may contain a list of related sections. The list of related sections in individual sections is provided for the convenience of CONTRACTOR and is not necessarily all-inclusive. CONTRACTOR may not rely upon this listing for determination of scope of work. Other sections of the Specifications not referenced in individual sections shall apply as required for proper performance of the Work. 4. Command type sentences may be used in the Contract Documents. These sentences refer to and are directed to CONTRACTOR. 5. Symbols for various elements and systems are shown on the Drawings. Should there be any doubt regarding the meaning or intent of the symbols used, a written interpretation shall be obtain Question Deadline 04/05/2024