Renovation of a municipal facility in Chula Vista, California. Completed plans call for the renovation of a municipal facility.

Sweetwater Authority (Authority) is a public water agency that provides water service to approximately 186,907 people in National City, Bonita and the western and central portions of Chula Vista, California. All provisions of law applicable to public contracts will be made part of the final contract to the same extent as though set forth herein and will be complied with by the successful Bidder. THE DESIRED SERVICE This Request for Quote (RFQ) is issued to cover the cost to Sweetwater Authority (Authority) for miscellaneous exterior painting to be completed at the Authority's Reynolds Desalination Facility. Location: Sweetwater Authority Reynolds Desalination Facility 3066 N 2nd Avenue Chula Vista, CA 91910 SCOPE OF WORK OPTION 1 The vendor shall provide all labor, supervision, materials, tools, equipment, and incidentals. This work entails: Exterior Painting - See Attachment A Option 1 1. Pressure wash property to remove loose paint, mildew, and debris from all paintable surfaces. 2. Prepare scrape, sand, and treat bottom of tanks with corrosion control all areas as required. 3. Prep and paint No. 1 Iron Manganese System Vessels and associated piping 4. Prep and paint No. 2 Iron Manganese System Vessels and associated piping. Additional Notes: o The contractor shall calculate and verify approximate paint coverage area. o The contractor shall submit samples to the Authority and verify colors, prior to ordering materials. o Protect all area not being painted from overspray, this includes, but is not limited to, vegetation, landscaping, glass, sidewalks, pavement, vehicles and any areas subject to wind-blown or dripping/falling paint. o Clean all areas upon completion SURFACE PREPARATION STANDARDS (as applicable) o SSPC-SP2 Hand Tool Cleaning o SSPC-SP3 Power Tool Cleaning o SSPC-SP12 / NACE 5 Surface preparation and cleaning of steel and other hard materials - pressure categorization (LPWC) with visual conditions of surface cleanliness at WJ-4. PAINT SYSTEMS Ferrous Metal: o Primer - First Coat - "Ulta-Grip Premium" (UGPR00) or equal o Finish - Second and Third Coat -"Evershield" (EVSH50) or equal. Non-Ferrous Metal (galvanized & aluminum) o Primer - First Coat - "Ulta-Shield Metal Primer" (ULGM00) or equal o Finish - Second and Third Coat - "Evershield" (EVSH30) or equal. SCOPE OF WORK OPTION 2 The vendor shall provide all labor, supervision, materials, tools, equipment, and incidentals. This work entails: Exterior Painting - See Attachment A Option 2 1. Pressure wash property to remove loose paint, mildew, and debris from all paintable surfaces. 2. Prepare scrape, sand, and treat bottom of tanks with corrosion control all areas as required. 3. Prep and paint Decant Tank 1 and associated piping. 4. Prep and paint No. 1 Iron Manganese System Vessels and associated piping. Additional Notes: o The contractor shall calculate and verify paint coverage area. o The contractor shall submit samples to the Authority and verify colors, prior to ordering materials. o Protect all area not being painted from overspray, this includes, but is not limited to, vegetation, landscaping, glass, sidewalks, pavement, vehicles and any areas subject to wind blown or dripping/falling paint. o Clean all areas upon completion SURFACE PREPARATION STANDARDS (as applicable) o SSPC-SP2 Hand Tool Cleaning o SSPC-SP3 Power Tool Cleaning o SSPC-SP12 / NACE 5 Surface preparation and cleaning of steel and other hard materials - pressure categorization (LPWC) with visual conditions of surface cleanliness at WJ-4. PAINT SYSTEMS Ferrous Metal: o Primer - First Coat - "Ulta-Grip Premium" (UGPR00) or equal o Finish - Second and Third Coat -"Evershield" (EVSH50) or equal. Non-Ferrous Metal (galvanized & aluminum) o Primer - First Coat - "Ulta-Shield Metal Primer" (ULGM00) or equal o Finish - Second and Third Coat - "Evershield" (EVSH30) or equal. SCOPE OF WORK OPTION 3 The vendor shall provide all labor, supervision, materials, tools, equipment, and incidentals. This work entails: Exterior Painting - See Attachment A Option 3 1. Pressure wash property to remove loose paint, mildew, and debris from all paintable surfaces. 2. Prepare scrape, sand, and treat bottom of tanks with corrosion control all areas as required. 3. Prep and paint Decant Tank 1 and associated piping. 4. Prep and paint No. 1 Iron Manganese System Vessels and associated piping. 5. Prep and paint Decant Tank 2 and associated piping 6. Prep and paint No. 2 Iron Manganese System Vessels and associated piping. Additional Notes: o The contractor shall calculate and verify paint coverage area. o The contractor shall submit samples to the Authority and verify colors, prior to ordering materials. o Protect all area not being painted from overspray, this includes, but is not limited to, vegetation, landscaping, glass, sidewalks, pavement, vehicles and any areas subject to wind blown or dripping/falling paint. o Clean all areas upon completion SURFACE PREPARATION STANDARDS (as applicable) o SSPC-SP2 Hand Tool Cleaning o SSPC-SP3 Power Tool Cleaning o SSPC-SP12 / NACE 5 Surface preparation and cleaning of steel and other hard materials - pressure categorization (LPWC) with visual conditions of surface cleanliness at WJ-4. PAINT SYSTEMS Ferrous Metal: o Primer - First Coat - "Ulta-Grip Premium" (UGPR00) or equal o Finish - Second and Third Coat -"Evershield" (EVSH50) or equal. Non-Ferrous Metal (galvanized & aluminum) o Primer - First Coat - "Ulta-Shield Metal Primer" (ULGM00) or equal o Finish - Second and Third Coat - "Evershield" (EVSH30) or equal. Additional pre bid meeting note: Tours of the facilities WILL NOT be provided before or after the pre-proposal conference. The job site tour and inspection are considered to be mandatory, a company representative must be present in order to submit a quote. Please email Val Martinez at vmartinez@sweetwater.org or (619) 409-6867 if you plan to attend the pre proposal meeting. All questions concerning the Pre-Proposal Conference, bid specification or scope of work must be submitted in writing either by mail, facsimile, or e-mail, and received April 15, 2024 through April 19, 2024, and no later than 2:00 P.M. at the address below: Sweetwater Authority Attn: Purchasing Division 744 F Street Chula Vista, CA, 91910 Fax # (619) 427-9574 purchasing@sweetwater.org Bid Results Cost for Painting Option 1 DC&M Inc - $12,335.00 Cost for Painting Option 2 DC&M Inc - $14,480 Cost for Painting Option 3 DC&M Inc - $24,800.00