Site work and renovation of a playground / park / athletic field in Rockville, Maryland. Completed plans call for the renovation of a playground / park / athletic field; and for site work for a playground / park / athletic field.

Description: The Maryland-National Capital Park and Planning Commission is soliciting bids from highly-qualified athletic field padding contractor(s) to fabricate and install replacement padding covering the walls of baseball/softball fields #1 and #2 at Cabin John Regional Park located at 10600 Westlake Drive, Rockville, MD 20852. Question Submission Deadline April 24, 2024, 4:00pm - All questions must be submitted electronically Question Response Deadline April 26, 2024, 4:00pm Contractor Selection Date June 28, 2024 All inquiries regarding this solicitation are to be made in writing to: Emily Mitchell, Corporate Procurement Specialist Department of Finance, Corporate Procurement Division 6611 Kenilworth Ave Riverdale, MD 20737 Email: Emily.Mitchell@mncppc.org Office: (301) 454-1602 Field 1 (Shirley Povich Field) Backstop: 4 in. high impact foam, glued to 3/4 in. plywood backing, sealed on edges and back, covered in uv/mildew resistant, 18 oz vinyl. Sizing details: 97 ft 8 in. length of wall; "L" shaped sections of padding 48 in. long each, 42 in. high (39 in. at 4 in. width / 3 in. at 7in. width) Dugouts: o Dugout 3 sided top rail pads with 3/4 in. plywood, 4 in. high impact closed cell foam & covered with 18 oz vinyl o Dugout 1 sided pad with 3/4 in. plywood, 4 in. high impact closed cell foam and covered with 18 oz vinyl, includes mounting hardware. Per running foot. o Round close cell water resistant foam, 1.5 # density, with 18 oz vinyl grommeted cover. Fits 1.5 in. pipe. Baselines: 4 in. high impact foam, glued to 3/4 in. plywood backing, sealed on edges and back, covered in UV/mildew resistant, 18 oz vinyl. Sizing details: First base: 82 ft. 2 in. length of wall, 22 in. high x 4 in. width. Third base: 50 ft. wall length; 48 in. wide sections, 22 in. high x 4 in. width. Field 2 Backstop: 7 in. high impact foam, glued to 3/4 in. plywood backing, sealed on edges and back, covered in UV/mildew resistant, 18 oz vinyl. Sizing details: 107 ft. length of wall; "L" shaped sections of padding 48" long each, 28 in. high (24 in. at 3.5 in. width / 4 in. at 7 in. width. Dugouts: 7in. high impact foam, glued to 3/4 in. plywood backing, sealed on edges and back, covered in uv/mildew resistant, 18 oz vinyl. Sizing details: First base: 30 ft. 6 in. length of wall; 24 in. sections, 24 in. high (20 in. at 3.5 in. width / 4 in. at 7 in. width. Third base: 30 ft. 6 in. wall length; 48 in. wide sections, 24 in. high (20 in. at 3.5 in. width / 4 in. at 7 in. width.