Renovation of an educational facility in Chester, New Jersey. Completed plans call for the renovation of a educational facility.

Disclaimer: "These documents are for viewing purposes only. Anybody who wishes to submit a bid MUST obtain the documents from Gianforcaro Architects, Engineers & Planners The Toilet Room Renovations Project at the West Morris Central High School, 259 Bartley Road, Chester, New Jersey SUMMARY A. Provide cutting and patching work to properly complete the work of the project, complying with project requirements for: 1. Removing the existing doors for the Toilet Room construction. Where necessary, cut and patch the existing door frames to receive new doors. Cut and patch the existing floors and walls in order to modify the existing plumbing fixtures and pipes. 2. Visual requirements, including detailing and tolerances. 3. Operational and safety limitations. 4. Inspection, preparation, and performance. 5. Cleaning. B. Do not cut and patch in a manner that would result in a failure of the work to perform as intended, decrease energy performance, increase maintenance, decrease operational life, or decrease safety performance. SUMMARY A. Selective Demolition: 1. Maintain all existing Life Safety items, such as Fire Alarm System throughout the demolition process and throughout the new construction. 2. Remove existing ceramic floor tile. Prepare floor for new ceramic tile. 3. Remove and replace the existing door and protect the existing door frame. Do not damage the existing door frame and components. 4. Selective demolition of existing floor and walls to receive new piping and new fixtures as designated on the Contract Drawings. 5. Remove existing lay-in panel ceilings and exposed metal suspension system. 6. Remove the existing light fixtures and protect existing wiring. 7. Protection of building components adjacent to or affected by selective demolition. 8. Pollution control during selective demolition, including noise control. 9. Removal and legal disposal of materials. 10. Modify existing plumbing components. 11. Modify existing electrical components. 12. Modify existing piping for new cabinet heater.