Site work for a mixed-use development in Key West Nas, Florida. Completed plans call for site work for a swimming pool.

ALL PROSPECTIVE BIDDERS/RESPONDENTS ARE HEREBY CAUTIONED NOT TO CONTACT ANY MEMBER OF THE COLLEGE OF THE FLORIDA KEYS STAFF OR OFFICIALS OTHER THAN THE SPECIFIED CONTACT PERSON. M/WBE's are encouraged to participate in the bid process. 2024-02 If you have questions regarding this ITB, email Lucas Torres-Bull at purchasing@cfk.edu. Questions will be accepted until 1:00 PM, April 17, 2024. Should you require a fully accessible version of this document, call or email Lucas Torres-Bull at (305)809-3268, purchasing@cfk.edu. Late or incomplete submissions will not be accepted. The Project involves the resurfacing of the existing pool to enhance its aesthetics, functionality, and safety. Some key elements of this project include but are not limited to, replacing old No Dive tiles and depth tiles with new ones, as well as applying a Diamond Brite surface to the pool. Other key elements of this project are listed below: 1) Drain and dewater the pool to an appropriate level for resurfacing and replace edge tiles. Also, thoroughly clean the pool interior to remove any debris, algae, or other contaminants. 2) Install frames and grates where needed. 3) Prepare surface, including pressure cleaning, notch cut around fixtures and hammer materials to feather surface, waterproof fixtures. This can also include repairing any cracks or imperfections in the pool surface. This will ensure a smooth and uniform application of the new finish. 4) Replace/restore lap lane tile with unglazed nonskid flooring tiles. 5) Install new No Dive tiles around the perimeter of the pool according to safety and regulations and manufacturer guidelines. Also, replace the depth tiles at the appropriate intervals to ensure accurate depth marking for swimmers. 6) Upgrade wet edge. 7) Resurface pool and apply Diamond Brite surfacing materials to the pool interior according to manufacturer specifications. Also ensure proper mixing and application of the materials to achieve the desired color and texture, requested. Please allow sufficient time for the Diamond Brite surface to cure properly. 8) Fill the pool with water and balance chemical levels to maintain water quality and conduct through testing to ensure the pool is safe for use and meets all relevant standards and regulations.