Remodeling and renovation of an educational facility in Greensboro, North Carolina. Completed plans call for the remodel of a educational facility.

LASER Lab DESCRIPTION OF WORK: The project includes relocating lab equipment from Hines 200 and 202 to ERIC 182 and 275. The scope also includes replacing an existing exhaust valve to accommodate the relocated lab equipment, installing a new process water chiller to serve the relocated lab equipment and modifying the existing electrical systems. The project will take place on the campus of North Carolina Agricultural and Technical State University (NCA&T) in Greensboro, NC. The Work of Project is defined by the Contract Documents and consists of the following: 1. The following summarizes in general the scope of work for this project: a. Demolish laser exhaust, and gas cabinet exhaust in Hines Hall 200. b. Demolish PPMS helium compressor indoor unit and outdoor unit on grade. Remove liquid and suction piping. Repair all piping penetrations. Remove outdoor unit equipment pad. c. Demolish ERIC 182 and 275 vacuum and gas connections from lab benches back to capped valves at ceiling. d. Relocate lab equipment from Hines 200, 202 to ERIC 182 and 275. e. Relocate existing exhaust valve in ERIC 182 to serve laser and remove existing snorkel. f. Install new process water chiller on ERIC roof and connect to existing BAS. Provide process water piping in new chase to ERIC 182 laser and ERIC 275 hydraulic equipment. g. Install hub drains in ERIC 182 and 275 to receive industrial cold water bypass drainage. Waste and vent to connect to existing. Minimal trenching required. h. Modify electrical connections, including wiring and breakers, as required for relocated lab equipment. i. Provide new 3-phase electrical connections for relocated lab equipment.