Site work and paving for a road / highway in Saint Clairsville, Ohio. Completed plans call for site work for a road / highway; and for paving for a road / highway.

This project consists of applying dust suppressants to repaired areas and preparing and applying a single chip seal on approximately 551,709 square yards and a double chip seal on approximately 34,614 square yards of County and Township Roads. A bid guaranty shall be provided with the bid in accordance with Section 153.54 of the Ohio Revised Code as follows: A bid guaranty shall be provided with the bid in accordance with Section 153.54(B) O.R.C. For the full amount of the bid, or certified check, cashier's check or letter of credit in accordance with Section 153.54(C) O.R.C. in an amount equal to 10% of the bid. Bid security furnished in Bond form shall be issued by a Surety Company or Corporation licensed in the State of Ohio to provide said surety. Each proposal must contain the full name of the party or parties submitting the proposal and all persons interested therein. Each bidder shall be pre-qualified by the Ohio Department of Transportation at the time of the bid opening and shall submit certification of said approval and pre-qualifications with bid. The owner intends and requires that this project be completed by September 7, 2024. All contractors and subcontractors involved with the project will, to the extent practicable, use Ohio products, materials, services and labor in the implementation of their project. Additionally, contractor compliance with the equal employment opportunity requirements of the Ohio Administrative Code Chapter 123, the Governor's Executive Order of 1972 and the Governor's Executive Order 84-9 shall be required. Bidders must comply with the prevailing wage rates on Public Improvements in Belmont County, Ohio, as determined by the Ohio Bureau of Employment Services, Wage and Hour Division, (614) 644-2239. The Belmont County Commissioners reserve the right to reject any and all bids, to waive any informalities in the bids received, and to accept any bid or combination of bids which is deemed most favorable to the County at the time and under the conditions stipulated. The Commissioners further declare that they will award the contract for this project to the lowest and best bid, which may not necessarily be the lowest bid. The bid package contains a Plan and Equipment Questionnaire designed to gather certain information that may be considered in this regard. No single factor will control the Board's decision to award, and the Board reserves the right to exercise its full discretion. This project consists of applying asphalt emulsion to repaired areas, preparing and applying a single chip seal on approximately 257,271 square yards of County Roads and 294,438 square yards of Township Roads, and preparing and applying a double chip seal on approximately 32,267 square yards of County Roads and 2,347 square yards of Township Roads. All Work shall be in accordance with the ODOT CMS Item 422, except the aggregate size and gradation and emulsion and binder application rates shall be in accordance with these specifications. For the Single Chip Seal, provide #8 aggregate consisting of washed limestone that conforms to the Item 422 specification, except the total percent passing No. 200 sieve shall be 0% to 2.5%. For the Double Chip Seal, provide washed #67 aggregate for the first course and washed #8 aggregate for the second course. Staging locations for stockpiling the #8 and #67 aggregates for Belmont County Roads will be available at the County's Roscoe and Tacoma garage properties. The contractor may contact respective Township's to see if staging locations are available for their portion of the contract. The contractor shall furnish and apply approximately 20,195 gallons of AE-DP asphalt emulsion as dust suppressants on areas that the County and Township forces have repaired prior to the chip seal application. The AE-DP shall be applied at a rate of 0.30 gallon per square yard. For estimating purposes, the CRS-2P polymer emulsified binder shall be applied at a rate of 0.35 gallon per square yard with 21 pounds per square yard of #8 aggregate for the Single Chip Seal item. For the Double Chip Seal item, the CRS-2P polymer emulsified binder shall be applied at 0.35 gallon per square yard with 35 pounds per square yard of #67 aggregate for the first course, then 0.54 gallon per square yard with 21 pounds per square yard of #8 aggregate for the second course, or as directed by the County Engineer. Wait at least 24 hours before placing the second course of a double chip seal. The actual application rate will be used to calculate the square yard pay quantities for the single and double chip seal items. The contractor shall be responsible for furnishing, loading, hauling and applying the aggregates from the supplier and staging locations to the job sites and all Work listed in the ODOT CMS Item 422 specification. Equipment mobilization and maintenance of traffic for the project shall be incidental to their respective bid items. The contractor shall always maintain one lane of traffic in accordance with the Ohio Manual of Uniform Traffic Control Devices, latest edition, and Figure 6H-13 Temporary Road Closure when Work is performed in both lanes. The roads, petroleum type and areas proposed to receive dust suppressant, single chip seal, and double chip seal are listed in the following pages. The Contractor shall provide the Engineer with copies of all supplier tickets showing quantities used for AEDP, CRS-2P, #67 and #8 aggregates prior to invoicing. These tickets will be used to verify the material application rates were in conformance with the specifications. 2024 CHIP SEAL PROGRAM TOTAL $1,282,264.00 Locations- BELMONT COUNTY ROADS - Single Chip Seal: CR64 Unity Church Rd CR66 Gun Club Rd CR66 Gun Club Rd CR78 National - Oco Rd (North End) CR78 National - Oco Rd (South End) CR78 Chapel Hill Rd CR4 Hawthorn Rd CR74 Rock Hill Rd CR104 Smith Rd CR104 Smith Rd CR68 Flushing North East Rd CR76 National - New Lafferty Rd CR76 National - New Lafferty Rd CR56 Country Club Rd CR102 Sandy Ridge Rd CR100 McMillan Rd CR114 Fairview Rd CR92 Ballard - Hunter Rd CR120 Douglass Rd CR98 Badgersburg Rd Double Chip Seal: CR68 Flushing North East Rd CR100 McMillan Rd CR92 Ballard - Hunter Rd MEAD TOWNSHIP ROADS Road Name____________ Single Chip Seal: T238 Jacobsburg Hill Rd T299 Meek Rd T501 Horse Mill Hill Rd T509 Gamble - Hughes Rd T714 Warren Hill Rd T715 Mills Hill Rd T1474 Johnson Ave UNION TOWNSHIP ROADS Road Name_______________ Single Chip Seal: T392 Chini - Orchard Rd T393 Gas Station - Shippey Rd T334 Lodge Hill Rd T401 Town Hill Rd T260 Wilson Rd T262 Stenger Rd T207 Fox Trail Rd T95 Lynn Rd T96 Falloure Rd PULTNEY TOWNSHIP ROADS Road Name______________ Single Chip Seal: T1182 Ash Alley T1181 Line Alley T300 Pinch Run T304 Trough Run Rd (Lower) T1184 Union St T1295 W East St T1186 Walnut Alley Dr T316 Tiger Rd T1194 School St Alley FLUSHING TOWNSHIP ROADS Road Name_______________ Single Chip Seal: T351 Rouggen Rd T356 Briar Hill Rd T316 Tiger Rd T1194 School St Alley WASHINGTON TOWNSHIP ROADS Road Name___________________ Single Chip Seal: T108 McGary Rd T119 Shepards Hill Rd Double Chip Seal: T127 Thompson Ridge Rd COLERAIN TOWNSHIP ROADS Road Name_____________________ Single Chip Seal: T1644 Twin Beach Rd T561 Robinson Hollow Rd T561 Robinson Hollow Rd T561 Robinson Hollow Rd T451 Gray's Ridge T704 Buzz Ayers Rd T826 Jug Run Rd T441 Prokes Rd T440 Ayers Rd T1008 Township Rd 1008 T439 Swingle Rd T475 Colerain - Mt. Pleasant Rd T475 Colerain - Mt. Pleasant Rd T438 Pine Hollow Rd T438 Pine Hollow / Stanley Add. T438 Pine Hollow / Stanley Add. T531 Angelo Rd T440 Murdock T455 Vickers Hill (Negus - Pavement) T675 Howard Hill Rd T675 Howard Hill Rd T404 Goletz Rd T675 Rose Valley Rd Township Driveway