Renovation of a water / sewer project in Santa Cruz, California. Completed plans call for the renovation of a water / sewer project.

The subject work involves providing access upgrades to the D.A. Porath Pump Station wet well by installing two new access hatches, one as an expansion of the existing opening, and the other in a second location. This project is being proposed to improve safety and access to the existing wet well located underneath the pump building's concrete floor. The project will construct the access hatches in phases to keep the pump building operational during construction. The first order of work is for the contractor to employ Ground Penetrating Radar technology to identify the existing structural features in the proposed work area. Once positively identified, the contractor will be able to install the access hatch in the new location. Once this hatch is installed, the District will remove and relocate the existing electrical equipment, hoist, and floats located at the existing wet well access opening to the new hatch. Then the contractor will be able to remove a nonstructural interior wall, air duct system, water filtration system, and door to be able to expand the existing access opening in the wet well and install the new hatch. The contractor will then replace the removed section of wall and air ducting and extend the water line to the relocated water filtration system. Each bid shall be accompanied by a certified cashier's check, or bid bond, in the amount of 10%of the total bid price, payable to Santa Cruz County Sanitation District, as a guarantee that the bidder, if its bid is accepted, will promptly execute the Agreement. The bidder shall guarantee the total bid price for a period of 60 days from the date of the bid opening. Question Deadline 04/22/2024 at 5:00 PM PT Any questions concerning the bid process, required submittals, evaluation criteria, bid schedule, and selection process should be sent through the online. DO NOT Email inquiries. Question Response Deadline: April 26, 2024, 5:00pm You must have either a Class A license or a combination of Class C licenses which constitutes a majority of the work: C-5, C-8, C-36, C-42, C-50, and C61/D06. Complete the work within 90 working days.