Site work for a water / sewer project in Naples, Florida. Completed plans call for site work for a water / sewer project.

construction of the NCRWTP Water Flow Meter Replacement, SCRWTP Plant Flow Meters and Lime Slakers Replacement - Advertising Project located in Collier County, Florida, for sealed bids to be received 06/07/2024 at 5:00 PM ET A. Scope: 1. Finish formed surfaces with one of the finishes specified in the following paragraphs and as indicated in the Schedule of Concrete Finishes in this Section. 2. Formed surfaces are those surfaces that the plastic concrete is placed against a temporary containment surface that will be removed after the concrete sets and takes its final form. B. General: 1. Provide setting and curing time from casting of concrete to removal of forms as specified in Section 033001 Concrete Work. 2. Provide curing after removal of forms as specified in Section 033001 Concrete Work. 3. Materials and mixes for finishes. a. Cement: Add white cement to mortars and grouts used for finishing if required to match color of repairs to surrounding surfaces. 4. Grinding: a. Where grinding of concrete surfaces is permitted: 1) Perform grinding using an iron-free wheel, such as an aluminum oxide wheel, to avoid entrapment of particles that produce rust stains. 2) At locations where plastic-protected reinforcing bar supports are used, limit grinding to a maximum depth of 1/16 inch. THE WORK A. The Work consists of demolition and construction of the following items. All of which shall be constructed in accordance with the Drawings and Specifications: 1. Demolish and dispose of two (2) existing lime slaking systems. 2. Demolish and dispose of one (1) existing flow meter and associated pipes and appurtenances at the NCRWTP. 3. Demolish and dispose of three (3) existing flow meters and associated pipes and appurtenances at the SCRWTP. 4. Provide and install two (2) new lime slaking systems. 5. Provide and install one (1) new flow meter, couplings, piping, and associated appurtenances at the NCRWTP. 6. Provide and install three (3) new flow meters, couplings, piping, and associated appurtenances at the SCRWTP.