Renovation of a water / sewer project in Nicholasville, Kentucky. Completed plans call for the renovation of a water / sewer project.

Odor Control Scrubber System Refurbishment Question Cuttoff Date & Time 4/30/2024 04:00:00 PM (ET) A certified check or Bid Bond in the amount of 5 percent of the bid price must be attached hereto for bids greater than $50,000. This check must be made payable to the Lexington-Fayette Urban County Government, and will be returned when the material and/or services specified herein have been delivered in accordance with specifications. In the event of failure to perform within the time period set forth in this bid, it is agreed the certified check may be cashed and the funds retained by the Lexington-Fayette Urban County Government as liquidated damages. Checks of unsuccessful bidders will be returned when the bid has been awarded. At a minimum, the Scope of Work includes the following: 1. Acid wash system to remove all buildup and inspect the internal sump area for any Fiber Reinforced Plastic (FRP) defects. 2. Inspect the spray nozzles for proper coverage of packing media. 3. Replace media, if recommended post acid wash by Original Equipment Manufacturer (OEM). 4. Replace all gaskets on manways. 5. Replace chemical pumps and motors. 6. Replace chemical piping per OEM recommendation. 7. Confirm operation and condition of recirculation pumps. 8. Replace the recirculation pump piping, valves, instrumentation, etc., per OEM recommendation. 9. Replace rotameters and makeup water piping, valves etc. 10. Replace chemical metering discharge piping and modify injection point into the sump, as recommendation from OEM. 11. Replace pH and ORP probes and controllers. Calibrate new instruments. 12. The control panel is missing a Dart control board - replace missing Dart control board and program / commission as necessary. 13. Supply and Install new Fan P-traps. 14. Replace both drain/Overflow piping arrangements. 15. Replace sump lo-level switches. 16. Replace fan belts. 17. Replace sight tubing on both chemical tanks. 2 18. Rince and clean both chemical tanks 19. Check condition and operation of the chemical tank level transmitters. Reprogram as required for correct operation. 20. Check condition and operation of the chemical tank program controllers on electrical control panel. 21. Check electrical panel and all functions. 22. After system repairs / modification are completed, restart & recommission system per OEM recommendations. 23. Provide O&M documentation for any updated equipment. 24. Provide operator training by a factory-trained technician. All inspections must be coordinated with Tom Hilbrand, Chief Plant Operations Manager (859) 425-2414