Site work and paving for a mixed-use development in Yorkville, Illinois. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

The proposed improvements consist of pavement patching, pavement milling, pavement resurfacing, curb and gutter removal and replacement, sidewalk removal and replacement, structure adjustments, pavement markings, curb sealing, restoration, traffic control, and all other ancillary work required to complete the project. Est. Completion Date: Oct. 18, 2024 Pre-Qualification: Yes A signed LPC 663 Form is included in this project manual and is appropriate for consideration of final disposition of soils at either a clean construction and demolition debris (CCDD) or soil-only facility. The attachments to the LPC-663 form (full description of Project Area, identified sites, analytical testing, etc.) are available from the Engineer upon request. DESCRIPTION OF WORK Various Local Roads within the United City of Yorkville, Kendall County (see location map) Project Length 34,488' (6.53 Mi) Proposed Improvement The proposed improvements consist of pavement patching, pavement milling, pavement resurfacing, curb and gutter removal and replacement, sidewalk removal and replacement, structure adjustments, pavement markings, curb sealing, restoration, traffic control, and all other ancillary work required to complete the project. 1. Plans and proposal forms will be available in the office of Engineering Enterprises, Inc. via www.questcdn.com (Quest Project #9011344) for no fee. IDOT Certification of Eligibility Prequal Code 003 is required. 2. Prequalification If checked, the 2 apparent as read low bidders must file within 24 hours after the letting an "Affidavit of Availability" (Form BC 57) in triplicate, showing all uncompleted contracts awarded to them and all low bids pending award for Federal, State, County, Municipal and private work. One original shall be filed with the Awarding Authority and two originals with the IDOT District Office. 3. The Awarding Authority reserves the right to waive technicalities and to reject any or all proposals as provided in BLRS Special Provision for Bidding Requirements and Conditions for Contract Proposals. 4. The following BLR Forms shall be returned by the bidder to the Awarding Authority: a. Local Public Agency Formal Contract Proposal (BLR 12200) b. Schedule of Prices (BLR 12201) c. Proposal Bid Bond (BLR 12230) (if applicable) d. Apprenticeship or Training Program Certification (BLR 12325) (do not use for project with Federal funds.) e. Affidavit of Illinois Business Office (BLR 12326) (do not use for project with Federal funds) 5. The quantities appearing in the bid schedule are approximate and are prepared for the comparison of bids. Payment to the Contractor will be made only for the actual quantities of work performed and accepted or materials furnished according to the contract. The scheduled quantities of work to be done and materials to be furnished may be increased, decreased or omitted as hereinafter provided. 6. Submission of a bid shall be conclusive assurance and warranty the bidder has examined the plans and understands all requirements for the performance of work. The bidder will be responsible for all errors in the proposal resulting from failure or neglect to conduct an in depth examination. The Awarding Authority will, in no case, be responsible for any costs, expenses, losses or changes in anticipated profits resulting from such failure or neglect of the bidder. 7. The bidder shall take no advantage of any error or omission in the proposal and advertised contract. 8. If a special envelope is supplied by the Awarding Authority, each proposal should be submitted in that envelope furnished by the Awarding Agency and the blank spaces on the envelope shall be filled in correctly to clearly indicate its contents. When an envelope other than the special one furnished by the Awarding Authority is used, it shall be marked to clearly indicate its contents. When sent by mail, the sealed proposal shall be addressed to the Awarding Authority at the address and in care of the official in whose office the bids are to be received. All proposals shall be filed prior to the time and at the place specified in the Notice to Bidders. Proposals received after the time specified will be returned to the bidder unopened. 9. Permission will be given to a bidder to withdraw a proposal if the bidder makes the request in writing or in person before the time for opening proposals Rubino Engineering, Inc. is pleased to submit the following summary report for the above referenced project. Rubino Engineering, Inc. received authorization to proceed on Rubino proposal number Q24.063g dated February 9, 2024 by Chris Ott from Engineering Enterprises, Inc. on February 21, 2024. Latitude: 41.66219 Longitude: - 88.44272 Sealed proposals will be opened and read publicly at the office of Name of Office United City of Yorkville Address 651 Prairie Pointe Drive, Yorkville, IL 60560 at Time 10:00 AM on Date 05/13/24