Site work and paving for a road / highway in Kalkaska, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

HMA Paving- 1 1/2" Overlay on M -72 from West of W Kalkaska Road to East of Birch St - Kalkaska The Wexford County Road Commission, in accordance with Title VI of the Civil Rights Act of 1964, 78 Stat. 252, 42 U.S.C 2000d to 2000d-4 and Title 49, Code of Federal Regulations, Department of Transportation, SubTitle A, Office the Secretary, Part 21, Nondiscrimination in Federally assisted programs of the Department of Transportation issued pursuant to such Act, hereby notifies all bidders that it will affirmatively insure that in any contact entered into pursuant to this advertisement, minority business enterprises will be afforded full opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, or national origin in consideration for an award. The Board reserves the right to reject any or all bids or any part of the same, to waive irregularities and/or informalities and to make the award in part or entirety in any manner deemed to be in the best interest of the Wexford County Road Commission. Contractors / suppliers that do not honor their bid through out the season may at WCRC discretion be precluded from future bid lettings. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com. Project Location: M-72, Kalkaska Township, Kalkaska County, Michigan. The attached log plans provided by MDOT detail the specific location of this work. The project POB is approximately 300' west of West Kalkaska Road and the POE is approximately 200' east of Birch Street. Description of Work: The intent of this work is to construct 2- 11' drive lanes and 1- 10' center turn lane. The existing paved shoulders are paved at 4% slope with much of the shoulder more like 6% to 8% slope. HMA wedge will be placed on the shoulder to flatten the slope to 2%, then place 1 1/2 " HMA, 5EML overlay over the entire section. Curbed approaches will be profile milled with 1 1/2 " relief along face of curbs. Tapered butt joints will be milled at POB and POE to transition to existing surface. Details are in the attached project log. Class II shoulders to be placed after completion of paving. Pavement markings are to be placed on completed project per the attached plan creating a center turn lane. The contractor's operations must be performed during daylight hours from Monday through Friday.