Site work and outdoor lighting for a road / highway in N Merrick, New York. Completed plans call for site work for a road / highway; and for outdoor lighting for a road / highway.

Fa Proj Y240-0slr-243, Nassau, Suffolk Cos., Highway - Traffic Signal and Lighting - Various Locations This project proposes to rebuild, upgrade and install traffic signals and repair or replace lighting systems and appurtenances along state highways in Nassau and Suffolk Counties. Locations are selected based on the need to address safety concerns and to improve the reliability and operation of traffic signals and lighting systems. The current status of the project is In Development. The Bid Opening is expected to be in Spring 2024. Construction is expected to begin in Summer 2024. Construction is expected to be completed in Summer 2025. This Project is Located in the Long Island Region and Includes the Following: Counties Nassau Suffolk Every bid must be accompanied by a bid bond, certified check or bank cashier's check payable to the NYS Department of Transportation, in the sum of the amount shown on the proposal title page. Bonds must be on form CONR 391. Electronic bids must include an electronic bid bond. Project related technical questions or comments must be submitted through the Construction Contracting section of the NYSDOT Business Center on the NYSDOT website Contract administration or procurement questions may be submitted either through the website or directed to Robert Kitchen, or the Assistant Director/Director of the Office of Contract Management, (518) 457-2124. If you have questions please contact: Stephen Canzoneri, PIN-0SLR24 NYSDOT Region 10 Public Information Officer 250 Veterans Memorial Highway Hauppauge, NY 11788 Phone: 631-952-6633 NYDOT - Highway - Traffic Signal and Lighting - Various Locations DESCRIPTION. This work shall consist of the excavation and necessary backfill required for traffic signal conduits. All such excavation shall be unclassified excavation as defined in subsection 203-1.01. The work shall include saw cutting any existing portland cement concrete and asphalt concrete top surfaces and the restoration of any pavement, shoulder, and sidewalk courses, subcourses, curbs, drives, lawns and other top surfaces.