Site work and paving for a road / highway in Middleburg, Florida. Completed plans call for site work for a road / highway; and for paving for a road / highway.

RFB No. 23/24-042, CR 220 Widening Phase 1. Proposals require a five (5%) percent bid bond and may not be withdrawn after the scheduled opening time for a period of thirty (30) days. The term bid bond shall include bonds or cashier or certified checks payable to the County. This project is being supported in part by a Local Transportation Projects Grant through the Florida Department of Transportation. LAST DATE FOR INQUIRIES: June 5, 2024, 4:00 pm Clay County Board of County Commissioners requests bids to perform the widening County Road 220 from existing 2-lane rural roadway to a 4-lane urban roadway from Hollars Place to the West RW of Henley Road and West of CR 739 (Henley Rd) to Chief Ridaught Trail for the construction project listed below. CR 220 Widening Phase 1 Clay County Funded - Hollars Place to the West RW of Henley Road : Part A FDOT Funded - West RW of Henley Road to Chief Ridaught Trail (Financial Project ID: 443396-1-54-01): Part B 3.2. Scope The Contractor will be responsible for performing construction of the Widening County Road 220 from existing 2-lane rural roadway to a 4-lane urban roadway from West of CR 739 (Henley Rd) to Chief Ridaught Trail and Hollars Place to the West RW of Henley Road. Work activities include but are not limited to the following: maintenance of traffic, clearing and grubbing, excavation and grading, erosion and sediment control, milling and asphalt paving, drainage, sodding, signalization, signs, and pavement markings. This project includes all associated work shown in the plans and specifications attached to this bid. All construction shall comply with the Florida Department of Transportation, FY 23/2024 Standard Plans for Road and Bridge Construction including Interim revision and Florida Department of Transportation, FY 24/2025 Standard Specifications for Road and Bridge Construction. Contractor must abide by all documented requirements and general notes as listed in the construction plans. The Contractor shall provide a Critical Path Method (CPM) production schedule meeting the contract days. This schedule shall be held to close scrutiny due to the impact to Inspection Time. If the contractor does not hold to the production schedule, the Contractor may be required to pay for inspection services for downtime of production. Bid Result Part A Kirby Development-6,431,829 Part B Kirby Development-5,321,812