Demolition, site work, renovation and addition to a library in Whitewater, Wisconsin. Completed plans call for the addition of a library; for the demolition of a library; for the renovation of a library; and for site work for a library.

Buildings/Public, Construction, Audio/Video, Mechanical Systems, Roofing, Windows, Landscaping, Signage, Electrical, Paving (Asphalt or Concrete), Flooring/Carpeting, Epoxy Flooring, Demolition/Building Removal/Hauling/Salvage, Painting Addition and Renovation to the existing Irvin L Young Memorial Library in Whitewater, Wisconsin. Refer to bidding documents. Each bid must be accompanied by a Bid Guarantee in the form of a Bid Bond, Certified Check or Bank Draft in an amount equal to and not less than ten percent (10%) of the bid and made payable to the City of Whitewater. No bid shall be withdrawn for a period of sixty (60) days after the bid opening date without the consent of the Owner. The Board of Trustees reserves the right to reject any or all bids or parts thereof or waive any irregularities or informalities in bidding. The scope of this work includes, but is not limited to, providing the following: 1. All horizontal communications cabling between individual work area outlet locations and their associated patch panel in the communication rooms. Contractor shall be responsible for terminations and testing of cables to the patch panels and termination blocks in the communication closets. 2. Horizontal communication system shall include the following systems: data, voice, audio/visual, paging/intercom, video surveillance, and access control. 3. All termination blocks, equipment racks, cross connect supports and guide rings required to terminate or cross connect communications cables in communications closets and/or at designated equipment locations. 4. All connectors, terminating devices, faceplates, etc. required to terminate and mount communications cables. 5. All necessary plywood, backboards, wiring enclosures, cable supports, equipment frames and pathways hardware, except for those already provided for in other building contracts. 6. All conduit systems including all necessary drilling, placement of support rods, and placement of mounting hardware wherever cables are installed within the ceiling plenum outside of cable trays. 7. All cable supports, including ladder runway, within the communication rooms. Pre-Qualification: Yes 8. Labeling and documentation of installation of all cables, racks, frames, outlets and hardware installed under this contract. 9. Testing and test documentation for all cabling as described within these specifications. 10. All connections to the communications grounding system. 11. Preparation and submission of shop drawings, as-built drawings, reports, documentation, and submittals as described within these specifications. 12. Fire-stopping of all openings in fire rated walls and floors created by or on behalf of the Contractor. 13. Raceways and conduits specified under Division 26 Electrical Specifications. 14. Cutting, patching, and painting. Questions regarding interpretation of the documents are to be submitted to Studio GC in writing as soon as possible and no later than Thursday, June 20th.