Site work for a water / sewer project in Corpus Christi, Texas. Completed plans call for site work for a water / sewer project.

Blower Repairs and Alignments for Wastewater Treatment Plants Question Deadline 06/04/2024 at 5:00 PM CT Bidders questions shall be submitted in writing, online via the City Supplier Portal using the electronic question feature, specific to this bid. General Requirements/Background Information A. The Contractor shall provide blower repairs and blower-motor alignments for the City's wastewater treatment plants as outlined in this Scope of Work. B. The City's blower inventory is outlined in Section 4.3 and consists of approximately 45 (installed and spare) multi-stage centrifugal and turbo blowers of various manufacturers, with HP ranging from 75-300. The most common manufacturers are Gardner Denver, Atlas Copco, Lamson, Hoffman, Lone Star, and Spencer. C. The Contractor shall provide labor, materials, parts, equipment, and transportation necessary to perform the service. D. All work, onsite or offsite, shall be completed during regular business hours. When work cannot be performed during regular business hours, overtime hours shall be authorized via written documentation by a City representative, only. Work Site and Conditions WWTP # Plant Name Address # of Blowers 1 Allison WWTP 4101 Allison Dr. 6 2 Broadway WWTP 801 Resaca St. 6 3 Greenwood WWTP 6541 Greenwood Dr. 5 4 Laguna Madre WWTP 201 Jester St. 7 5 Oso WWTP 601 Nile Dr. 15 6 Whitecap WWTP 13409 Whitecap Blvd. 4 General machine work and/or repairs shall consist of, but not limited toBalancing, o Welding, o Straightening, o Grinding, o Custom part manufacturing, o Shaft rebuilding and fabrication, o Sand blasting. 4. Typical repairs may include, but are not limited to: o Hone and de-burr mating surfaces, o Tapping threaded holes, o Repair/replace impeller sleeves, o Repair/replace impellers, o Replacement of radial thrust bearing, o Replacement of process seals, o Repair/replace blower shaft.