Site work for a water / sewer project in West Hempstead, New York. Completed plans call for site work for a water / sewer project.

Drainage Improvements for Various Locations. Contractor to remove and dispose of the existing material by excavation in the area of proposed swale. Contractor is to install swale and check dams every 15 feet in accordance with the detail requirements. Contractor is to install asphalt where indicated on plans and meet the requirements set forth in the specification manual. Contractor is to flare the ends of the swale where indicated on the plans. Question Deadline 06/04/2024 at 5:00 PM ET Vendors questions will be accepted by email up toand the responses will be distributed to all prospective quoters. Vendors responses are due June 5, 2024 at 5:00 pm. Location: Hempstead Lake State Park 1000 Lake Drive West Hempstead, NY 11552 A. Project Location: B. Hempstead Lake State Park 1000 Lake Drive, West Hempstead, NY 11552 C. This work shall include the installation of drainage swales as shown on drawings C-101, C-102, and C-501, General Requirements, Specifications, and as directed by the Parks Director's Representative. D. Contractor is to remove and dispose of the existing material by excavation in the area of proposed swale. Contractor is to install swale and check dams every 15 feet in accordance with the detail requirements. Contractor is to install asphalt where indicated on plans and meet the requirements set forth in the specification manual. Contractor is to flare the ends of the swale where indicated on the plans. E. This project will be carried out in 1 phase. F. The Owner's Representative shall inspect all work for acceptance upon request of the Contractor. The request shall be received at least fourteen (14) calendar days before the anticipated date of inspection. Contractor to remove and dispose of the existing material by excavation in the area of proposed swale. Contractor is to install swale and check dams every 15 feet in accordance with the detail requirements. Contractor is to install asphalt where indicated on plans and meet the requirements set forth in the specification manual. Contractor is to flare the ends of the swale where indicated on the plans.