Site work for a playground / park / athletic field in Quitman, Mississippi. Completed plans call for site work for a playground / park / athletic field.

ARPA Tourism - Park Improvements Clarkco State Park Bid Preparation Will Be in Accordance With Instructions to Bidders Bound in the Project Manual. The Bureau of Building, Grounds and Real Property Management Reserves the Right to Waive Irregularities and to Reject Any or All Bids. Note: Telephones and Desks Will Not Be Available for Bidders Use at the Bid Site. Questions should be directed to the Professional. Should a Bidder find discrepancies in, or omissions from, the Drawings or Project Manual, or be in doubt as to their meaning, the Bidder should immediately notify the Professional. The Professional will send written instruction(s) or interpretation(s) to all known holders of the documents. Neither the Owner, nor the Professional, will be responsible for any oral instruction or interpretation. Visit site prior to bid. Devise a plan for installation of complete and operable electrical systems meeting the requirements and intent of the Contract Documents. Submission of Bid stands as evidence that the Contractor accepts the Contract Documents as sufficient and complete for the work to be performed. Notify the engineer at least two weeks prior to bid of any discrepancies between the Contract Documents and actual field conditions. No change orders will be granted due to existing conditions that could have been observed during a site visit. B. Provide temporary power and lighting during construction. Coordinate with the General Contractor for the exact requirements. C. Electrical switchgear and panelboard layouts are based on sizes of Square D equipment. Equipment manufactured by General Electric, Siemens, and Cutler Hammer are equally acceptable. However, the Electrical Contractor is responsible for selecting and furnishing gear that will fit in the spaces provided and shall be responsible for arranging the gear to meet the required code clearances. Regardless of the manufacturer, the Electrical Contractor shall provide a drawn-to-scale electrical layout with the equipment brochures for all rooms in which panelboards, motor control centers, switchboards, or switchgear are placed. The drawings shall include the work of all other trades including mechanical system piping, ductwork, sprinkler piping, etc. No conduits shall be installed until layouts have been approved.