This is a service / maintenance or supply contract in Dallas, Texas. Contact the soliciting agency for additional information.

The Dallas Park and Recreation Department is looking for approximately 8Ohigh security welded wire fence that will meet the following requirements. Design: Wind Load: 105 MPH. Exposure Category: C Post: P Post shall be sealed with a cap. Post finish shall be galvanized then Marine Grade coated. Color to be black Panel: 10 1 The panel shall be reinforced with 4 x Panel shall have 2 x 70 flanges along sides (internal fixturesall fixtures shall be on the inside of fence line) Panel shall have 2 x 30 flange along top and toe (integrated rigid angle, anti-scale locking device). Panel post shall have a flush panel post finish with no climbing aid. The panel shall be affixed to the post over 48 line wires using a combination of double and single bolt comb clamps and fixed with anti-vandal bolts Anti-vandal clamp covers fixed with epoxy fluid bolts Panel and fixtures shall be galvanized then Marine Grade Coated (acid modified). The fence panels shall be provided so that limited field cutting and finish patch work is required in the field. Supply additional galvanizing material for touching up the fence system on site. Ensure all areas and components of the fence and gates are properly coated. Wall has a visibility index of 36%. Color to be black Accessories: A 100 mm high toughened steel castle spike strip shall be affixed to the top panel edge continuously to prevent climbing. Color to be black Fittings: General: Comply with ASTM F 626 Post Caps: Provide caps for every post and opening in the top of the fence structure. Rail and Brace Ends: For each gate, corner, pull, and end post. Finish: All fittings shall match the finish of the fence system Question Deadline 06/10/2024 at 9:30 AM CT Deadline to submit Questions Online.