Site work and paving for a road / highway in Mukwonago, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Project involves routing roadway cracks and joints, followed by installation of prescribed crack sealing compounds. The Project Manager for this Project is Ron Bittner, who may be contacted at Village of Mukwonago Department of Public Works, 440 River Crest Court, Mukwonago, WI 53149, (262) 363-6447, regarding the project. All Work is included in a single prime contract. Bid Security, bid security in the amount of not less than 5% of the bidder's maximum bid price and in the form of a bid bond, certified check, or cashier's check (payable to the Village of Mukwonago) is required with the bid. A Bidder's qualification statement must be delivered to the Village of Mukwonago at least 5 days before the Bid opening date. The Village of Mukwonago reserves the right to accept the most advantageous Bid, or to reject any and all Bids. Award of Work described herein is subject to the provisions of the Wisconsin Statutes. The identified streets shall have the new cracks and edge joints at the curb line routed to provide a minimum sealant reservoir of 3/4 (3/4) inch in width by 3/4 (3/4) inch in depth. Routers equipped with dust control to meet OSHA's Action Level (AL) limit for silica exposure of 25 ug/m3 per 8-hour day must be used for this process. Routed streets sections shall then be swept by mechanical or vacuum operated street cleaning equipment. The routed cracks are to be blown out by compressed air and then a heat lance shall be used to condition the pavement prior to applying sealant. Previously sealed cracks that have opened shall have loose joint sealant removed, conditioned with a heat lance and be over-banded. All cracks shall be filled with CRAFCO 221 ROADSAVER Sealant or equivalent and applied in a manner that meets ASTM Specifications. Products other than CRAFCO 221 ROADSAVER must be approved by the Public Works Director prior to application. The Identified parking lots shall have the cracks cleaned with a wire wheel to depth of 3/4 inch and then using an air compressor with a wand attached to the end of it, blow the cleaned cracks out. A heat lance shall then be used to condition the pavement prior to applying sealant. All cracks shall be filled with CRAFCO 221 ROADSAVER Sealant or equivalent and applied in a manner that meets ASTM Specifications. Products other than CRAFCO 221 ROADSAVER must be approved by the Public Works Director prior to application