Renovation of a detention facility in Gretna, Louisiana. Completed plans call for the renovation of a detention facility.

We extend this proposal to cover all labor, materials, equipment, crane work, and incidentals necessary to install a silicone roof coating system at the Jefferson Parish General Government Building, located at 200 Derbigny Street Gretna, LA 70053. Subcontractors are not allowed for this bid. Line item 1: o Base bid: All work as described in these specifications, excluding sections 9.0. Line Item 2: o Ancillary Work: Provide a cost per square foot to remove, repair, and replace water-damaged roofing materials described in Section 9.0 of these specifications. This identified cost will not be part of the base bid and will not be used to determine the low bidder. This line item will only be used if needed. The work shall be substantially complete within 120 calendar days of the written notice to proceed and completed and shall be ready for final acceptance no more than 30 calendar days after substantial completion Bonds: o Surety Bond: An Electronic bid bond will be required with bid submission in the amount of 5% of the total bid. The vendor shall indicate the electronic bid bond number in the location specified on the electronic bid envelope. No scanned paper copies of any bid bond will be accepted as part of the electronic bid submission. o Performance Bond: A Performance Bond in the amount of 100% of the total contract price will be required. The performance bond shall be produced upon contract execution. - Remove, Repair, and Replace Water-Damaged Roofing Material: o This work will only be used on an as-needed basis predicated on the results of the moisture test described in Section 7.1. o Remove water-damaged area down to the metal roof deck o Install new bidder-supplied insulation to match existing insulation. o Thickness of new insulation shall match existing insulation. o Fasten insulation with mechanical fasteners and deck mate screws. o Apply a base sheet of SBS granulated membrane o Prime with a top finish coat to match the existing roof membrane o Apply a cap sheet to match the existing roof membrane