Site work and paving for a bridge / tunnel in Pasco, Washington. Conceptual plans call for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

The major features of the projects are as follows Topographic and boundary surveying Bridge design services for the demolition and replacement of current structure with a concrete girder bridge of appropriate span and sufficient width to accommodate 2 travel lanes 16 feet in width each. The design shall include, but is not limited to, bridge railing, approach guardrail, bridge approaches, drainage, and finish roadway grades. The project shall be designed to current State, County, AASHTO and LFRD standards. Geotechnical investigation and report. Preparation of FHWA Environmental Classification Study NEPA, SEPA, and all required disciplinary reports and investigations. Identify and assist with all Local Agency, State, USBR, and Federal permits that will be required. Identify and assist with all right-of-way needs, including temporary construction easements. Provided complete bridge design services, including computations, contract plans, specifications, and cost estimate (PS&E). Coordinate with landowners, tribes, utilities, USBR, WSDOT, and FHWA. Prepare Load Rating report. Questions and inquiries regarding this RFQ shall be submitted in writing to Kathleen Neuman, Franklin County Associate Engineer, via email at Kneuman@FranklinCountyWA.gov The method of Contractor Selection has not been Determined at this time. Each bridge has an estimated budget of $250,000 for a combined total of $500,000.