Site work and renovation of a water / sewer project in Hattiesburg, Mississippi. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

ARPA Infr - Waste Treatment - Paul B. Johnson State Park A deposit of $100.00 is required. Contract documents may be obtained from: Professional: Dungan Engineering, P.A. Address: 1574 Highway 98 East Columbia, Mississippi 39429 Phone: 601-731-2600 Email: info@dunganeng.com SCOPE OF WORK A. Visit site prior to bid. Devise a plan for installation of complete and operable electrical systems meeting the requirements and intent of the Contract Documents. Submission of Bid stands as evidence that the Contractor accepts the Contract Documents as sufficient and complete for the work to be performed. Notify the engineer at least two weeks prior to bid of any discrepancies between the Contract Documents and actual field conditions. No change orders will be granted due to existing conditions that could have been observed during a site visit. B. Provide temporary power and lighting during construction. Coordinate with the General Contractor for the exact requirements. C. Electrical switchgear and panelboard layouts are based on sizes of Square D equipment. Equipment manufactured by General Electric, Siemens, and Cutler Hammer are equally acceptable. However, the Electrical Contractor is responsible for selecting and furnishing gear that will fit in the spaces provided and shall be responsible for arranging the gear to meet the required code clearances. Regardless of the manufacturer, the Electrical Contractor shall provide a drawn-to-scale electrical layout with the equipment brochures for all rooms in which panelboards, motor control centers, switchboards, or switchgear are placed. The drawings shall include the work of all other trades including mechanical system piping, ductwork, sprinkler piping, etc. No conduits shall be installed until layouts have been approved. D. Locate junction boxes, pull boxes, disconnects, and other equipment requiring access in such a manner that they are accessible at the end of construction. Notify the Architect where it is impossible to plan conduit routing or equipment placement in such a manner, and provide the necessary access panels in the ceiling or wall as required. The access panel type and style shall be subject to the Architects approval. Employ a painter to provide the appropriate coatings as directed by the Architect. E. Relocate, or recircuit, all electrical equipment, conduit, and circuitry conflicting with or obstructing work on this project. Where the electrical systems are owned by other entities, pay them to relocate, or recircuit, their facilities. F. Arrange for connection of service to all electrical systems by the appropriate utility company. Coordinate completely with all utility company requirements even if they are different than the contract documents. If utility company requirements are different from the contract documents, notify the engineer at least ten days prior to bid. Pay all utility company charges necessary for installation and connection of service. If the cost of the service is unavailable at the time of bid, submit a letter to the General Contractor, signed by the appropriate utility company official, stating that the cost has not been determined. The General Contractor shall submit this letter with his bid. The cost will then become the Owners responsibility.