Renovation of a stadium in Plano, Texas. Completed plans call for the renovation of a stadium.

As of October 4, 2024, project was awarded to Air Conditioning Innovative Solutions, Inc, awarded amount is $230,231.64. Clark Stadium Systems & Compliance Project. SCOPE OF WORK: The Plano ISD - Clark Stadium System & Compliance Project focuses on renovating the HVAC equipment and control systems in the Athletic offices. This initiative aims to enhance overall system efficiency and improve indoor air quality within these spaces. Project Location - Clark Stadium - 6600 Stadium Dr, Plano, TX 75023 The estimated budget and Location Estimated Budget - $525,000 and $40,000 owner's contingency Question Deadline 07/30/2024 at 4:00 PM CT WORKINCLUDED A. B. This section of work comprises furnishing of all materials, equipment, tools, scaffolding, rigging, hoisting, labor, and transportation necessary for the complete installation of the mechanical systems as shown on the plans and as specified herein. Bidders shall determine the contents of a complete set of drawings and specifications and be aware that they may be bidding from a partial set of drawings, applicable only to the various separate contracts, subcontracts, or trades as may be issued for bidding purposes only. The contract documents and the complete scope of work for the project are illustrated on the combined Architectural, Structural, Plumbing, Heating, Ventilating, Air Conditioning, and Electrical, and each Bidder shall thoroughly acquaint himself with all the details of the complete set of drawings and specifications before submitting his bid. All drawings and specifications form a part of the contract documents for each separate contract and shall be considered as bound therewith in the event partial sets of plans and specifications are issued for bidding only. The submission of bids shall be deemed evidence of the review and examination of all drawings, specifications, and addenda issued for this project as no allowances will be made because of unfamiliarity with any portion of the complete set of documents. DESCRIPTION OFWORK A. Air Handlers Nameplates and tags are to be provided for all mechanical equipment and piping in the project. Identification is also required for the following, but is not limited to: 1. 2. 3. 4. 5. 6. 7. 8. 9. Boilers/Water Heaters Condensing Units Duct Dampers Filter Sizes for Air Handlers Fire Dampers Heat Exchangers Outside Air Units Piping 10. Pumps 11. Starters 12. Supply/Exhaust Fans 13. Valves