Site work and paving for a road / highway in Mio, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Up to 2.79 mi of hot mix asphalt base crushing and shaping, paving, aggregate shoulders, signing and pavement markings on Cherry Creek Road from County Road 489 to Townline Road (Priority 1) and on Cherry Creek Road from Townline Road east (Priority 2), Oscoda County. This contract will be constructed with an innovative contracting method, Fixed Price Variable Scope. This is a Local Agency project. 0% Sbp Participation Required Net classification required for this project is 634 Cb or 634 Ea In addition to the above minimum prequalification requirement for prime contractors this project includes subclassifications of Cb and Ea. If the prime contractor is not prequalified in those subclassifications it must use prequalified subcontractors. Those subcontractors must be designated prior to award of the contract to the confirmed low bidder. MIDOT - 2601 603 - Hot Mix Asphalt Base Crushing and Shaping, Paving, Aggregate Shoulders, Signing and Pavement Markings on Cherry Creek Road This project is a fixed price variable scope (FPVS) federally funded 3R local agency project on Cherry Creek Road in Oscoda County. This project JN 214624 will be split into 2 priorities: 1. Priority 1. This priority must be bid. Cherry Creek Road from County Road 489 (Sta 12+30) to Townline Road (Sta 134+00), JN 214624. A. Scope includes work associated with 2.30 miles of hot mix asphalt base crushing and shaping, hot mix asphalt overlay, aggregate shoulders, guardrail, permanent signing, and permanent pavement markings 2. Priority 2. This priority is optional and provided for information only. Cherry Creek Road from Townline Road (Sta 134+00) to 0.49 miles east (Sta 160+00), JN 214624. A. Scope includes work associated with 0.49 miles of hot mix asphalt base crushing and shaping, hot mix asphalt overlay, aggregate shoulders, guardrail, permanent signing, and permanent pavement markings The work in the limits defined as Priority 1 is estimated to be the amount of work for the available budget to construct the project. Additional work, set up as Priority 2, is included to maximize the amount of work that can be completed with the available construction budget. Design plans, environmental clearance documents, and the contract will contain "For Information Only" pay items and quantities for the additional work in Priority 2. This work shall be done in accordance with the requirements of section 501 of the Standard Specifications for Construction except as herein specified. This work consists of removing and disposing of signs, supports, and associated attaching or fastening hardware in accordance with sect 810 of the Standard Specifications for Construction, except as modified herein. This work consists of complying with the Department's construction management processes. The Department will manage this contract using the AASHTOWare Project Construction Materials (APCM) software. Ensure all change orders are approved using APCM. No paper documents, faxes, or other methods/media are permitted for change order approvals except as allowed by this special provision or specifically approved by the Engineer. This work consists of meeting MDOT's construction document management (CDM) system requirements. Submit all project documentation for this contract in electronic format and place it in MDOT's CDM system, unless otherwise noted in this special provision. No paper documents, in printed format (faxes, letters, etc.) are permitted except as allowed by this special provision or specifically approved by the Engineer. The Contractor is responsible for keeping all information in the CDM system up to date throughout the execution of the contract. This work consists of furnishing and delivering a tangent MASH, Test Level 3 (TL-3) compliant guardrail approach terminal (Type 2M) to the job site; submitting detailed drawings and installation manuals for the selected terminal(s) to the Engineer; and installing the device(s) as shown on the plans or as directed by the Engineer. Complete this work in accordance with manufacturer's details and specifications, and this special provision. The construction, installation, treating and reconditioning of pipelines transporting gas vapors within cities, towns, subdivisions, suburban areas, or within private property boundaries, up to and including private meter settings of private industrial, governmental or other premises, more commonly referred to as ""distribution work,"" starting from the first metering station, connection, similar or related facility, of the main or cross country pipeline and including duct installation. Tunnel, shaft and caisson work of every type and description and all operations incidental thereto, including, but not limited to, shafts and tunnels for sewers, water, subways, transportation, diversion, sewerage, caverns, shelters, aquafers, reservoirs, missile silos and steel sheeting for underground construction. Open cut construction work shall be construed to mean work which requires the excavation of earth including industrial, commercial and residential building site excavation and preparation, land balancing, demolition and removal of concrete and underground appurtenances, grading, paving, sewers, utilities and improvements; retention, oxidation, flocculation and irrigation facilities, and also including but not limited to underground piping, conduits, steel sheeting for underground construction, and all work incidental thereto, and general excavation. For all areas except the Upper Peninsula, open cut construction work shall also be construed to mean waterfront work, piers, docks, seawalls, breakwalls, marinas and all incidental work. Open cut construction work shall not include any structural modifications, alterations, additions and repairs to buildings, or highway work, including roads, streets, bridge construction and parking lots or steel erection work and excavation for the building itself and back filling inside of and within 5 ft. of the building and foundations, footings and piers for the building. Open cut construction work shall not include any work covered under Tunnel, Shaft and Caisson work.