Site work and paving for a road / highway in Fresno, California. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Department of Public Works and Planning proposes to place chip seal coats, cape seal coats, slurry seal coats and traffic striping on various roads in Fresno County. The work to be done consists, in general, of furnishing and placing screenings within or over asphaltic emulsion at various existing roads in Fresno County. The seal coat will be constructed on 67 centerline miles of roadway on County roads. The project includes roads that currently show signs of distress such as alligator, block, longitudinal, and transverse cracking identified by Road Maintenance & Operation Division. An additional 12 centerline miles of road of seal coats are included as additive bids. If you have any questions about bid submission, please contact us at DesignServices@fresnocountyca.gov or calling (559) 353-4919 or (559) 600-4543. Bid security in the amount of ten (10) percent of the amount of the bid, and in the form of a bid bond issued by an admitted surety insurer licensed by the California Department of Insurance, cash, cashier's check or certified check shall accompany the bid. You must either attach an electronic bid bond or provide an original bid bond (or other form of bid security authorized by Public Contract Code Section 20129(a)), prior to the bid opening. Bid security shall be made in favor of the County of Fresno. Question Deadline 08/20/2024 at 2:00 PM PT All questions regarding this project shall be in writing and shall be received by the Department of Public Works and Planning, Design Division, on the seventh (7th) calendar day before bid opening. Questions shall be submitted on the Request for Clarification Form provided on our website online No contract will be awarded to a contractor who has not been licensed in accordance with the provisions of the Contractors State License Law, California Business and Professions Code, Division 3, Chapter 9, as amended, or whose bid is not on the proposal form included in the contract document. A valid California Contractor's License, Class A (General Engineering) or Class C-12 (Earthwork and Paving) or Class C-32 (Parking and Highway Improvement), is required for this project. The Board of Supervisors reserves the right to reject any or all bids. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.The engineer's estimate range is $4,100,000 - $4,500,000 INTENT : The Contract intent is to provide for work completion using the best general practices. Nothing in the specifications, special provisions, Standard Specifications, or in any other Contract document voids the Contractor's public safety responsibilities. Reserved : Remove warning, regulatory, and guide signs when directed by the Engineer.