Site work for a road / highway in Plano, Texas. Completed plans call for site work for a road / highway.

The City of Plano intends to transition from its existing Model 332 and 333 traffic signal control cabinets to the Advanced Transportation Controller Cabinet (ATCC). This document provides detailed specifications for an ATCC for the City of Plano, Texas. The ATCC shall include the housing, cages, modular internal assemblies and components, and interfaces. This specification lays out the ATCC configurations to be used in the city. The ATCC is designed such that all components are fully standardized and modular with pluggable cabling. The city intends to replace its existing Caltrans Model 332 and Model 333 cabinets with new Advanced Transportation Controller Cabinets. The new ATCCs will be installed on existing foundations and shall use the existing bolt pattern. No questions will be answered over the phone or through online email. Time Critical Bid Deliveries: The City of Plano cannot guarantee, due to internal procedures, that any bids sent via US mail will be picked up and delivered by the closing date and time. It is recommended that critical bid deliveries be made either electronically through IonWave or in person as described above. It is further recommended that users review all electronic response attachments to ensure the uploaded files are able to be downloaded and viewed. Instructions for this, if needed, can be found in the Supplier Bid Response Quick Tutorial online in Ionwave or by calling Ionwave Support at 866-277-2645. Responses or parts of a response whether hardcopy or electronic that cannot be viewed may deem your submittal as non-responsive. In addition, the City reserves the right to request clarification in such cases. Question Deadline 09/03/2024 at 12:00 PM CT Model 352 The Model 352 Cabinet shall consist of the following: (1) Housing compliant with Caltrans 2020 TEES Housing 1B details A6-1, A6-2, and this specification. (2) Single mounting cage with a minimum mounting area of 53 inches (3) Assemblies and components as shown in Table 3.1 (4) Mounted on City's existing Model 332 foundations using existing bolt pattern. Model 352S The Model 352S Cabinet shall consist of the following: (1) Housing complaint with Caltrans 2020 TEES Housing 1B details and this specifications with an additional 10 inches of height. (2) Single mounting cage with a minimum mounting area of 63 inches (3) Assemblies and components as shown in Table 3.1 (4) Mounted on City's existing Model 332 foundations using existing bolt pattern. Model 350 The model 350 Cabinet shall consist of the following: (1) Housing compliant with Caltrans 2020 TEES Housing 3 details and this specification (2) Two mounting cages with a minimum mounting area of 53 inches (3) Two full size front doors and two full size rear doors (4) Mounted on City's NEMA P-Size cabinet foundations using existing bolt pattern.