Renovation of a municipal facility in Oak Park Heights, Minnesota. Completed plans call for the renovation of a municipal facility.

Building Automation System Replacement at MCF Oak Park Heights. Site Address: 5329 Osgood Avenue North Est. Value: $ 2,347,573.64 Est. Completion Date: Oct. 31, 2025. Description: State Project Number 78OP0040 Building Automation System Replacement at MCF Oak Park Heights This solicitation is Targeted Group (TG), Economically Disadvantaged (ED), or Veteran-Owned Small Businesses (TG/ED/VO) preference. A. The work will be done under one prime contract that includes: General, Mechanical, Demolition, Automation, and Low Voltage Wiring construction. B. The following summary is a general guide to the scope of work. It should not be construed as a detailed list of work included in the contract. 1.) All existing BAS software and control hardware shall be replaced with new BAS software and control hardware. This shall take place in phases to minimize any disturbance to the normal operation of MCF Oak Park Heights. 2.) Replace all space temperature sensors throughout the facility with new sensors which are compatible with the new hardware and software. 3.) Replace a selection of other sensors (air temperature, humidity, water temperature, etc.) throughout the facility. 4.) Replace VAV box damper actuators with new electronic actuators. Under the basic scope, the existing VAV boxes and dampers will be retained in place, and the controls will be replaced. The locations of existing VAV boxes are shown on the drawings. 5.) Replace all existing pneumatic control valves with new control valves, with electronic actuators. This involves pipefitting, to accomplish the entire valve replacement. Replace all existing pneumatic damper actuators with new electronic actuators and linkages. The existing dampers will remain. Additional Description: The Section 00 41 73 Prime Contractor Response Form (Response Form), which includes the attachments listed in the project manual table of contents, is posted within the Virtu Bid area of the online. The Response Form must be downloaded, completed, and uploaded with the bid before it can be posted. This solicitation includes qualification requirements. Attachment C of the Response Form contains the qualification requirements for the solicitation. Qualification requirements include, but are not limited to: Responding prime company and/or building automation subcontractor has completed as a Prime Contractor or as a Subcontractor, the work for at least two (2) contracts which have achieved Substantial Completion since August 1, 2019, for construction of building automation system upgrade/replacement at an occupied facility. Each of these contracts MUST have had a construction value of $1,000,000 or greater. pre bid meeting notes. Attendees will not be allowed to bring cell phones, cameras, smart watches and tools into the facility. Attendees will meet at the main facility entrance. Question Deadline 09/13/2024 at 3:00 PM CT