Renovation of a residential development in Sodus, New York. Completed plans call for the renovation of a residential development.

The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to scope of work and architectural drawings if supplied. Work is to be started within 120 days of award. This is a NYS Public Works project and prevailing wages are to be paid. Site must be cleaned and all materials secured at the end of each work day. Absolutely no scraps, especially fasteners, are to be left unsecured. No debris will remain on site. The contractor will remove all debris. Subcontractors will be pre-approved by the project manager as well as the business office and will be made aware of this scope of work. Scheduled inspections will be conducted or subsequent work may be removed and destroyed in its entirety. The residential code of NYS will be followed. Continuity of work: Once the job has begun it will be worked on continuously until completion. This home will be occupied during this work and safe appropriate accessibility will be maintained. The safety plan will be followed. Upon completion of the Upstairs Bathroom Renovation, before removal of equipment, contractor is to schedule a quality control and quality assurance inspection with the point of contact. If any condition of this scope is neglected the project may be terminated immediately. Contract term: 30 days after completion of project Discretionary procurements less than $50,000 Question Deadline 09/06/2024 Official Responses to Questions by: September 10, 2024 CR Number: 2113023 1) Follow the Design provided. 2) Be prepared with the necessary materials. Solid surface materials take time to be acquired as well as many other finishes do. Continuity of work is important. The project will be worked on continuously from demolition to finish. Have your materials in hand. 3) The location of the project dumpster will be approved by the house director 4) Demolish the existing bathroom including removing the ceiling, wallboard, and subfloor taking care to salvage the door frame and fire alarm/strobe 5) Install the floor drains and necessary plumbing rough in. 6) An inspection of the job is required at this point. Schedule this with the point of contact. 7) Once approved, install the subfloor according to the design. It should generally pitch to the drains. The maximum differential between the hallway flooring and the finished bathroom floor is 1/2 inch. 8) The epoxy flooring system is outlined in the design and will be installed by an installer with 5 years of experience verified by the manufacturer of the resinous material.