Site work for a power facility in Phoenix, Arizona. Completed plans call for site work for a power facility.

Scope of Work the City of Phoenix is Seeking a Qualified Contractor to Provide Construction Services for the Project Listed Below. The City of Phoenix is Proposing the Installation of 3.9 Miles of Fiber Optic Infrastructure and Associated Intelligent Transportation System (Its) Devices Along Deer Valley Road, From 7th Avenue to 7th Street, and Along 7th Street, From Deer Valley Road to Paradise Lane. The 7th Street Fiber Transportation Enhancement Project - Phase 1 Will Extend the City's Real-time Transportation Management Capability Along Key Roadway Corridors in the City and Provide a Layer 3 Switch to Serve as a Fiber Node Facility in the Northern Part of the City. This Enables More Reliable Network Routing for City Its Devices in the Area, Consistent With the Applications Being Submitted in September 2019 for Funding Through the Maricopa Association of Governments System Management and Operations Program. The 7th Street Project Begins by Connecting to the Existing City Fiber North of the Intersection of 7th Avenue and Deer Valley Road. The Project Will Provide Infrastructure for the City of Phoenix to Connect to the Traffic Signal at 7th Avenue and Deer Valley Road and Travel East Along Deer Valley Road Using Existing Conduit to Connect to a New Pull Box Halfway Between Central Avenue and 7th Street That Will Create a New Connection Point Along Existing City Conduit Infrastructure. New Conduit Infrastructure Will Be Installed East From That New Pull Box to the Intersection of 7th Street and Deer Valley Road. New Cabinet Will Be Installed Near the Northwest Corner of the 7th Street and Deer Valley Road Intersection and Provide Infrastructure for a Fiber Connection to the Traffic Signal in the Southwest Corner. New Conduit and Fiber Infrastructure Will Travel South Along 7th Street and to Cross the State Route 101l (Commonly Referred to as Loop 101) Freeway. The Conduit and Fiber Infrastructure (Cable and Pull Boxes) Will Continue South Along 7th Street to Provide a Node Connection (Pull Box #9) to Each of the Traffic Signals Along the Corridor Ending at the Traffic Signal at the 7th Street and Paradise Lane. This Project Will Utilize Federal Funds and is Subject to the Requirements of 49 Code of Federal Regulations Part 26 and the U.s. Department of Transportation Dbe Program. A Disadvantaged Business Enterprise Goal of 4.19 Percent Has Been Established for This Project. The City of Phoenix, in Accordance With the Provisions of Title Vi of the Civil Rights Act of 1964 (78 Stat. 252.42 U.s.c. 2000d-4) and the Regulations, Hereby Notifies All Bidders That It Will Affirmatively Ensure That Any Contract Entered Into Pursuant to This Advertisement, Disadvantaged Business Enterprises Will Be Afforded Full and Fair Opportunity to Submit Bids in Response to This Invitation and Will Not Be Discriminated Against on the Grounds of Race, Color, or National Origin in Consideration for an Award. General Information the City Reserves the Right to Award the Contract to the Lowest Responsible Responsive Bidder or All Bids Will Be Rejected, as Soon as Practicable After the Date of Opening Bids. The City of Phoenix Will Provide Reasonable Accommodations for Alternate Formats of the Bid Packet by Calling Kathleen Kennedy at (602) 534-5789 or Calling Tty 711. Questions Pertaining to Process Or Contract Issues Should Be Directed to Kathleen Kennedy at (602) 534-5789 or Kathleen.kennedy@phoenix.gov. All questions regarding plans and specifications must be received by the CS, via email, minimum 7 calendar days prior to bid opening (By September 10, 2024) The work under this section shall consist of furnishing all materials, personnel, and equipment necessary to perform all surveying, staking and verification of the accuracy of all points which have been provided by the Engineer in the project plans. Included in this work will be all calculations required for the satisfactory completion of the project in conformance with the plans and specifications. The work will be done under the direction of a registered professional surveyor employed by the Contractor. Measurements of all removals and pay quantity items will be the responsibility of the Engineer. ST889340660