Site work for a municipal facility in Seattle, Washington. Completed plans call for site work for a municipal facility.

The work under this Contract consists of furnishing all labor, tools, equipment, materials, incidentals, superintendents, subcontractor coordination and overhead to perform tipping floor resurfacing. The Contractor will furnish all labor, materials, and equipment necessary to install 2" depth of Met-Top E abrasion resistant material as per the Technical Data Sheet directions for use in designated areas. The Contractor will supply the abrasion resistant floor topping using pre-mixed, ready to use Met-Top E, a high strength emery aggregate based topping with Bond Coat outlined in 3.b.1 that includes Metco Low-Mod Epoxy and quartz aggregate over concrete base slabs at locations indicated on the reference drawings as well as barriers to delineate work areas. The Contractor will also furnish all labor, materials, and equipment necessary to clean, wash, and prepare the existing surface before applying resurfacing material. The Contractor will also furnish all labor, materials, and equipment necessary for the curing process and saw cutting of joints after applying the resurfacing material. The contractor shall request a Metalcrete Industries technical service representative to provide on-site assistance during floor topping installation. Last Date for Questions 9/12/24 05:00:00 PM Submit all inquiries via email to the Contract Specialist and cc the Alternate Contract Specialist. No verbal answers by any County personnel or its agents and consultants will be binding on the County. Contract Specialist: Brian Pinney, brian.pinney@kingcounty.gov, 206-263-1067. Alternate Contract Specialist: Mark Hoge, mark.hoge@kingcounty.gov, 206-263-9325 Engineer's Estimate: $1,200,000.00 Work sites: Enumclaw Transfer Station, 1650 Battersby Ave E, Enumclaw, WA, 98022 Factoria Transfer Station, 13800 SE 32nd St, Bellevue, WA, 98005 Vashon Transfer Station, 18900 Westside Highway SW, Vashon, WA, 98070 Subcontracting Opportunities: Concrete floor resurfacing, Concrete saw cutting, grinding, and milling. Dump Truck - hauling, Vactor Truck services, Rental Equipment. Apprenticeship Requirements: 15% minimum Apprentice Utilization Requirement. SCS Utilization Requirements: 15% minimum requirement for King County Certified Small Contractors and Suppliers (SCS). Bid Guaranty: Not less than five percent (5%) of the Total Bid Price A. The bid shall be accompanied by a PDF file of an original bid guaranty in the amount equal to at least 5% of the Total Bid Price. Upon request by the County, bidder(s) shall provide the original bid guaranty which accompanied their electronic bid. The bid guaranty shall be in one of the following formats and made payable to KING COUNTY: (1) a bid guaranty bond, using either the form provided in 00 43 13 or a form acceptable to the County which contains provisions substantially similar to those in 00 43 13, duly completed by a guaranty company authorized to carry on business in the state of Washington; or (2) a postal money order, a certified check, or cashier's check drawn upon a banking institution with a branch office in the state of Washington. The surety signing the bid guaranty bond shall be registered with the Washington State Insurance Commissioner, and the surety's name shall appear in the current Rev. 5/2/2024 00 20 00 - 6 Instructions to Bidders Authorized Insurance Company List in the State of Washington published by the Office of the Insurance Commissioner. Failure to submit the PDF file of the original bid guaranty, or upon request by the County, provide the original bid guaranty, shall render the bid non-responsive and be rejected. A. The County reserves the right to request Bidders to grant an extension of the effective period of the bid. Such grant shall not be unreasonably withheld. If a Bidder pursues a protest and/or request for reconsideration, its bid is deemed extended until the County executes a contract, or until the protest or request for reconsideration is withdrawn by the Bidder.